yobit eobot.com

Announcement

Collapse
No announcement yet.

Radiator inlet + amalg

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by POPEYE View Post
    only hose i had to buy was for the intercooler over 90 soddin quid
    Mine would still be lacking an intercooler if that was me.


    Nev, just a quickie on that sealant. Does the one bottle tend to last quite a while, or is it best to get a couple?

    Comment


    • #17
      Originally posted by MattF View Post
      Nev, just a quickie on that sealant. Does the one bottle tend to last quite a while, or is it best to get a couple?
      Found out that they do the 16oz bottle too, so got that one ordered. Should last me out.

      Cheers again for that link Nev.

      Comment


      • #18
        16oz should last you forever. You only use a thin coating and allow to go tacky before assembling. Too much and the excess just gets squeezed out and wasted.

        Nev

        Comment


        • #19
          Originally posted by NiftyNev View Post
          16oz should last you forever.
          Good. When I was looking on their site, it only cost an extra £4 or so for the larger bottle, so it seemed a shame not to be prepared when it was less than double the cost for four times the quantity. (Yup, I'm a hoarder).


          You only use a thin coating and allow to go tacky before assembling. Too much and the excess just gets squeezed out and wasted.
          So best to stick with the old adage of apply sparingly.

          Cheers again btw Nev.

          Comment


          • #20
            So what was the brown stuff you were thinking of? Stag, Hermatite, HP sauce? The suspense is killing me!
            'Tis better to sting than to be stung!

            Comment


            • #21
              Originally posted by Scorpion View Post
              So what was the brown stuff you were thinking of? Stag, Hermatite, HP sauce? The suspense is killing me!
              I've no idea. It isn't Stag, (although that stuff looks useful), so I'm assuming it must be akin to that Permatex stuff but produced by someone else. Just can't darned well remember what. Seem to remember it being in a white tube with orange writing, but that's all I can remember, (and knowing my memory even that bit could be completely wrong ).

              Still awaiting the delivery of that form-a-gasket at the moment. The order turned up today, but methinks there was a slight error in the order processing somewhere. It most definitely wasn't form-a-gasket in the box. They've dispatched the order again today, so should have it here tomorrow hopefully.

              Comment

              Working...
              X