fuel filler pipe

[stormforce]

Can anyone reccomend the best way to extend the fuel filler pipe on the beast.I want to fit the 3" bodylift but need to extend the pipe.Or can anyone reccomend a place to buy the filler pipe.TIA

[BUSHWHACKER]

Here you go....
http://www.cbsonline.co.uk/hoses-11-c.asp

[Maverick]

Right that page is getting bookmarked

[stormforce]

Thanks Vince.I will check the hose diameters tomorrow and get some ordered up

[Phantom]

When you extend the steering use the plastic shroud that your going to remove, it fits a treat.

[stormforce]

When you extend the steering use the plastic shroud that your going to remove, it fits a treat.

I remeber you said something about that before Steve.Any instructions on how to fit it to the original pipe thats there

[Phantom]

I can't remember how I did it Rich. I had to take it off when I went up to 6 inch. From what I can remember it just went on perfect and was done in about a minuet. When I did the bigger lift I cut the rubber hose and found a piece of steel pipe that fitted inside and just clamped them up. Job done.

[stormforce]

I can't remember how I did it Rich. I had to take it off when I went up to 6 inch. From what I can remember it just went on perfect and was done in about a minuet. When I did the bigger lift I cut the rubber hose and found a piece of steel pipe that fitted inside and just clamped them up. Job done.

I was thinking of just doing something like that myself.Bit of a dumb question but is it just a short peice of stainless pipe i would need to use

[Phantom]

I was thinking of just doing something like that myself.Bit of a dumb question but is it just a short peice of stainless pipe i would need to use

Yep that just about sums it up, and a smaller bit for the breather.

[stormforce]

Thanks Steve i shall be getting this done asap then

[pirate-storm]

when you doing that then rich?