Lexurf goes to church.

[wpg_kzn130]

Not from just the door no. Mind you I have not been there for 20 years and with a name like Lucifer I don't really do churche's. But I take it it's Abercarn or Crumlin.
Anyway what you doing at a church with a set of ladders, nicking lead? oh and put some bigger tyres on that truck or at least a set of 30mm wheel spacers it would look so much nicer.

i was looking into getting spacers for my truck but i herd they aren't good if you plan on off roading. Are there any disadvantages to adding spacers?
luke

[Phantom]

p.s. Steve, what rear diff are you using?

Just the standard 2.4 diff I think. The truck was quite modified when I got it. So am not sure, but it needs lowering its far too high. at 2000rpm in 4th its doing 60mph put it in 5th and it drops to 1500, but then your up and down the gears all the time. I plan on towing my caravan with it so its got to be done. Also I need to do both so I can retain 4 wheel drive.

[Phantom]

i was looking into getting spacers for my truck but i herd they aren't good if you plan on off roading. Are there any disadvantages to adding spacers?
luke

No just advantages in my oppinion. Improved looks and better handling. If you go higher you also need to go wider or you will tip over easier. I have had 30mm spacers on my little one ever since I bought it and have really abused it off road. Just make sure you get the billet ones and not the cheap see through ones off eblag. Or they will break.

[wpg_kzn130]

No just advantages in my oppinion. Improved looks and better handling. If you go higher you also need to go wider or you will tip over easier. I have had 30mm spacers on my little one ever since I bought it and have really abused it off road. Just make sure you get the billet ones and not the cheap see through ones off eblag. Or they will break.

Did you mean to say no disadvantages? i think that better looks and better are handling are great advantages. what is good place to buy a quality set? and would the 4runner use the same spacers as the surf?

[BUSHWHACKER]

Did you mean to say no disadvantages? i think that better looks and better are handling are great advantages. what is good place to buy a quality set? and would the 4runner use the same spacers as the surf?

4runners and Surfs are the same vehicle.
You might get some wheel spacers from here.....
http://www.4crawler.com/4x4/ForSale/ProductLine.shtml
if not then Ebay.

[That Ruddy Squirrel]

4runners and Surfs are the same vehicle.
You might get some wheel spacers from here.....
http://www.4crawler.com/4x4/ForSale/ProductLine.shtml
if not then Ebay.

Like these - http://cgi.ebay.co.uk/BILLET-ALUMINI...3%3A1|294%3A50


Trev

[wpg_kzn130]

4runners and Surfs are the same vehicle.
You might get some wheel spacers from here.....
http://www.4crawler.com/4x4/ForSale/ProductLine.shtml
if not then Ebay.

there not exactly the same, i've found out by trial and error by trying to fit pieces from a north American 4runner to my hilux surf. they look the same untill you try to put it on .

[BUSHWHACKER]

there not exactly the same, i've found out by trial and error by trying to fit pieces from a north American 4runner to my hilux surf. they look the same untill you try to put it on .

What pieces specifically?

[wpg_kzn130]

will manual locking hubs interfere with the spacers?

[POPEYE]

Dont think so, there'll just be less of em pokeing through

[wpg_kzn130]

What pieces specifically?

so far just a couple odds and ends. when i bought my truck it was missing a spare tire rack, so i tried to fit one from a 93 4runner but it was just under a foot longer than the hilux one so it covered my liscense plate. but i eventully found one from a hilux, cost me 300.00 thou. the ect buttons are diffrent, i've been trying to find one for my surf for about a year now. the wiper arms are diffrent. thats all i've tried so far, but when i changed my ball joints i was able to use 4 runner ones. i'm looking for a new bumper for my truck and i'm going to try to fit a 4runner one, i'll let u know how it goes.

[BUSHWHACKER]

Is you license plate in the center of the tailgate? If it is then you'll need the side mount plate holder when using the rear mounted spare.

Ask on here for an ECT button, I'm sure one of the guys that part out Surfs will send you one.

[wpg_kzn130]

no it is on the side but it still covered it a little bit which isn't allowed, i got a surf one now so it's all good. ya i will start askin around for one. do you think that theese are a good quality spacer? and do it's a good size or should i go with a smaller set? i will be installing my 2" lift and a 2" body lift with 33"s.

[BUSHWHACKER]

no it is on the side but it still covered it a little bit which isn't allowed, i got a surf one now so it's all good. ya i will start askin around for one. do you think that theese are a good quality spacer? and do it's a good size or should i go with a smaller set? i will be installing my 2" lift and a 2" body lift with 33"s.

Here are some spacers closer to you similar to the set in the poat above....
http://motors.shop.ebay.ca/items/Aut...86Q2ec0Q2em282

The 4Runner isn't listed but I guess the Tundra or Tacoma 6 lug spacers would fit.
Maybe ask the guys over on Yotatech for confirmation.

[Phantom]

Here are some spacers closer to you similar to the set in the poat above....
http://motors.shop.ebay.ca/items/Aut...86Q2ec0Q2em282

The 4Runner isn't listed but I guess the Tundra or Tacoma 6 lug spacers would fit.
Maybe ask the guys over on Yotatech for confirmation.

And only $68 why do we have to pay twice as much as everywhere else in the world it's not fair.