Wheels

[TRUCKMAN]

Will a set of Pajero Wheels with an offset of -15 to -25 and a PCD of 139.7 and 108.0 centre bore go straight onto my 2.4? Cheers.

[Apache]

-15 to -25? Which is it?

Try a search for the offset of standard surf wheels. I cant remember what it is right now, but moreoffset than that will be OK within reason.

Mine are -32, but some people are running -50s on lifted trucks.

[stormforce]

-15 to -25? Which is it?

Try a search for the offset of standard surf wheels. I cant remember what it is right now, but moreoffset than that will be OK within reason.

Mine are -32, but some people are running -50s on lifted trucks.

Yep mine are 15 x 10 with -52 offset and i had to trim a little of the valance to stop the tryes rubbing and alo had to take a hammer to the end of the sill as the tyres were catching there also

[Vagrant No2]

I got a set of Paj alloys off my 1st gen breaker . They fitted fine .

[TRUCKMAN]

The Guys not sure off the offset all i know its either - 15 or 25 and they are off a Shogun Pajero and have 310x10.50x15 tyres on them and as he is in Scotland and I am 200 miles away I cant nip round to try em lol my mate lives up there and is coming down next week so can bring them its just a matter of me taking the risk?

[Apache]

As you're obviously bone idle, I searched for you. Standard 2nd gen wheels are -8, so they should be fine, and into the bargain will stand out 10-20mm further than standard wheels (depending on if they turn out to be -15 or -25).

[MattF]

As you're obviously bone idle, I searched for you.

Glad to see you're getting back to form.

[Apache]

Wasn't being funny. I wanted to remind myself anyway.

[MattF]

Wasn't being funny.

I believe you. Thousands wouldn't, but I do.

[TRUCKMAN]

Bone idle moi lol...thanks for the info mate