so while i was out today playing with snips and spanners and stuff

pull off carpet bord

its held on with these

remove the black steel cover

its just a few screws

peel plasic off very slowly it rips easy

remove the plasic top too

tricky bit is removel of the handle
keep it pulled up to get at the screws

remove the rod thats joined to the lock first

then remove the rod joined to the handle

now the plasic top can be removed
this should show each end like this


now clip down both these clips on each side of the back door
this will trick the car in to thinking its back door is shut

then very carfully get some one with a brain to tease the window up
like so (this is also how to take out the back window so be very carfull it dont fall out

reason for doing all this is to get at these runners

most of the time its these stoping ya window working not your motor
a motor will cut out after its been staind too much
clean these runners up and grease them

and do the same to these bits

once you cleaned all the arms and runners
you will need a long straight peace of wood or ruler a dry rag and a jar of vaselin or if your anything like me and cant find nothing when you need it use what will fit but vaselin is a must it looks after rubber

clean down the back door rubber make sure its a dry rag just to clear out any bits and crap biuld up
do this in every rubber all the way round

and the repeat the procese but with vaselin this time

pop it all back together after you have done
and buzz off the end result
http://s288.photobucket.com/albums/l...=endresult.flv
yes i was bord today

pull off carpet bord

its held on with these

remove the black steel cover

its just a few screws

peel plasic off very slowly it rips easy

remove the plasic top too

tricky bit is removel of the handle
keep it pulled up to get at the screws

remove the rod thats joined to the lock first

then remove the rod joined to the handle

now the plasic top can be removed
this should show each end like this


now clip down both these clips on each side of the back door
this will trick the car in to thinking its back door is shut

then very carfully get some one with a brain to tease the window up
like so (this is also how to take out the back window so be very carfull it dont fall out

reason for doing all this is to get at these runners

most of the time its these stoping ya window working not your motor
a motor will cut out after its been staind too much
clean these runners up and grease them

and do the same to these bits

once you cleaned all the arms and runners
you will need a long straight peace of wood or ruler a dry rag and a jar of vaselin or if your anything like me and cant find nothing when you need it use what will fit but vaselin is a must it looks after rubber

clean down the back door rubber make sure its a dry rag just to clear out any bits and crap biuld up
do this in every rubber all the way round

and the repeat the procese but with vaselin this time

pop it all back together after you have done
and buzz off the end result
http://s288.photobucket.com/albums/l...=endresult.flv
yes i was bord today

Comment