After chopping half of the loom out of my truck I now need to know which is the ignition trigger wire to run to the starter motor. Also do I have to somehow tell the truck it is in park now the gearbox has been removed.
Which wire runs to the oil pressure switch? And which wire to the water temp switch.
Cheers guys.
Steve.
Which wire runs to the oil pressure switch? And which wire to the water temp switch.
Cheers guys.
Steve.

.first of all all the senders from the original wiring work on six volts so none of them are any good.so you will have to trace them back and re wire like i did.and hack off the old loom.i fitted a bush button start on mine so,i re wired that system too.


Comment