Rear seat belts

[plumb bob]

Hi all, my 2LT has the lap type belts in the rear, but I need to fit Child Booster seats, So can 3 point belts be retro fitted, and are they expensive??

[gwh200]

wot the blimmin heck you been up to !!

you can get a 3 point belt thta fits right round the seat, got mine from halfrauds about a year ago.

[plumb bob]

I have a friend that has young children, one 8ish the other 4yrs, so needs 3 point belts, will halfrauds fit them, and how much graham?

[gwh200]

well aint you sounding better mate.

i just bought them and did it meself

[plumb bob]

ok, cool, gotta go home now, speak to you tomorrow.

[nero279]

roughtrax do three point belts for the surf, think they're about £47 each.

Should be able to fit the pair in under an hour, aslong as the reinforced mounting plates for the inertia reels and seatbelt top hanger are already behind your rear side trim panels, i'm pretty sure they were there on my prefacelift surf, so there's a good chance they were there on all 2nd gens.

[RodLeach]

Get a Surf belt off stormforce/supersurf/bio etc

behind the rear panels will be a mounting point for one aswell as a little plastic panel that pops out for the belt to pass though. (dont forget the little plastic clip that goes on behind the new belt)

remove a little clip on the roof an it has the bolt for a seat belt.

you'll want the actual clip aswell as on my 1st surf they were different to the 2nd.

absolute piece of pi$$ to fit.

[drunkmonkeyboy]

Hello, remember me? i have the same year and model surf as you. I picked up the rear belts and new seats all round for £50 of supersurf!! fitted them in about an hour. work a treat. you will see a little plastic cover where the belt is meant to come through the plastic sides in the boot, i cut a slot in mine (little plastic cover) so the belt fits through and looks nice. you will know what i mean when you come to fit them. be carefull taking the plastic sides off as they have two bolts at the rear under the rear light casing, they break easly . good luck getting it sorted

[TonyN]

Get a Surf belt off stormforce/supersurf/bio etc

.

Or TonyN, everyone forgets about me..... .............

They should bolt right it, you have the hole for them above the the front of the rear window.

I have lot of sets here if you want them, pm me.

[Tiger]

Alrite tony did you get your wall sorted

[RodLeach]

Never really thought about you doing spares Tony....


i'll remember you from now on mate.

[TonyN]

Alrite tony did you get your wall sorted

Yeah, its looking good.

Never really thought about you doing spares Tony....

You've been here, did you not notice the amount of dead surfs lying around!!

[RodLeach]

You've been here, did you not notice the amount of dead surfs lying around!!

Didn't really think about it to be honest mate.

[plumb bob]

Ok, great, I'll have a look at the weekend, and see what i've got.
I would think (hope) that all 2nd gen chassis's were built to the same spec, but who knows.

I'll look at it and pm You Tony, Cheers,

[nero279]

I have the two square plastic trim panels for the side panels, from a seatbelt model spare here, I'll dig em out for you when we do your lifts.