yobit eobot.com

Announcement

Collapse
No announcement yet.

Gear Box

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gear Box

    Anyone point me in the right direction...My 2.4 manual surf is getting really hard to put in gear. Sometimes it's only reverse that won't go in then today I struggled to get first gear or any I had to switch the truck off and select 1st then turn it back on. After 15 mins driving all the gears worked ok. I park on a very steep slope and don't use the truck much during the week so it may sit still for 5 days I also park facing down hill with the front. Could this cause an issue or is the clutch on the way out?

    ? is there a gear box oil dip stick??

    Thanks for any help

    Cheers
    Mark

  • #2
    try bleeding the clutch slave cylinder its quite possible that you have air in the system and its not fully depressing the lever.(does the clutch feel like its slipping,loss of power.does it make a noise when you depress the clutch pedal..)oil level plug on g/box,undo and you should be able to put your finger in there to check the oil level. the oil should be level or just below the plug.
    www.overfab.uk

    Comment


    • #3
      Aaarrrggghhh!!!! A picture of Mark in his gimp mask.....

      Buy an auto gearbox - it will solve all those problems.....
      Too old to care, young enough to remember

      Comment


      • #4
        Originally posted by MudSurfer View Post
        Aaarrrggghhh!!!! A picture of Mark in his gimp mask.....

        Buy an auto gearbox - it will solve all those problems.....
        yeeeeeeaaaaaa.you like andy.
        www.overfab.uk

        Comment


        • #5
          Originally posted by surfenstein View Post
          yeeeeeeaaaaaa.you like andy.

          Hahahaha - yeah, but no - but NO! It scares me....

          How is the winch mount doing?? (Sorry for nicking the thread for a min)
          Too old to care, young enough to remember

          Comment


          • #6
            Originally posted by MudSurfer View Post
            Hahahaha - yeah, but no - but NO! It scares me....

            How is the winch mount doing?? (Sorry for nicking the thread for a min)
            what winch mount.?????

















            just waiting for the plate to come back from the benders. i though i would get it brake pressed rather than weld it all together.
            www.overfab.uk

            Comment


            • #7
              Originally posted by surfenstein View Post

              just waiting for the plate to come back from the benders..

              Too many jokes, so little time......
              Too old to care, young enough to remember

              Comment


              • #8
                bonjour msieur stein et surfer du mud
                Non intercooled nothing.

                Comment


                • #9
                  Originally posted by gwh200 View Post
                  bonjour msieur stein et surfer du mud
                  Ah - monsewer Haines of Pooville, how is one this fine day of Wednes?
                  Too old to care, young enough to remember

                  Comment


                  • #10
                    tres bon sir tres bon.long time no hear,have you been arrested or something.....i was on monday night,it was ace
                    Non intercooled nothing.

                    Comment


                    • #11
                      wasssssuuupppppppp.big G.hows it hanging dude.by the way have you not told us something G.have you changed gender,you try finding one woman that thinks surfing the crimson tide is ace.(sorry if that offends anyone)
                      Last edited by surfenstein; 2 July 2008, 16:05.
                      www.overfab.uk

                      Comment


                      • #12
                        not half as bad is trying to find the wifes volume switch....she wasnt amused,but apart from everything all is ok !!

                        (and the only surfing i do is on 4 wheels)
                        Non intercooled nothing.

                        Comment


                        • #13
                          Originally posted by gwh200 View Post
                          tres bon sir tres bon.long time no hear,have you been arrested or something.....i was on monday night,it was ace

                          Que???

                          Wha????

                          Why?????
                          Too old to care, young enough to remember

                          Comment


                          • #14
                            ah silly me,you know how you can get one word wrong and it changes the whole meaning of a sentence !!!
                            Non intercooled nothing.

                            Comment


                            • #15
                              Originally posted by gwh200 View Post
                              ah silly me,you know how you can get one word wrong and it changes the whole meaning of a sentence !!!

                              what - you had a heart attack???
                              Too old to care, young enough to remember

                              Comment

                              Working...
                              X