tech wkend.

[surfenstein]

right guys i think this is gonna get a little bit out of hand,the idea is to get a truck or a couple of trucks that want some work doing on them,then to get a few of us guys together for a wkend to sort the vehicles mentioned out.the biggest thing is to get the guys that want to learn how to do stuff together and show them how its done.there will be other wkends available at other venues.so basically lets not try and jam to much into one wkend.nigel can we use your workshop for the next tech wkend.?????

[Apache]

You're welcome to use the road outside of my house for the next one

(Those of you who know it will understand...)

[BUSHWHACKER]

You're welcome to use the road outside of my house for the next one

(Those of you who know it will understand...)

Kerbside is the safe side!

[MudSurfer]

You're welcome to use the road outside of my house for the next one

(Those of you who know it will understand...)

That's a road????? I thought it was a path...

[surfenstein]

You're welcome to use the road outside of my house for the next one

(Those of you who know it will understand...)

good idea andy that way we can get ten trucks down there and cause total chaos.

[captain_chaos]

I've got loads of space in my garden, just need to demolish the garage to get surfs in it though. Don't think my landlord would approve of that though.

[Snorkel]

I'm still waiting to buy mine! Hopefully one will appear through on the e-mail this week though! Once ordered it'll take 3 months to get here, as ASAP as possible after arriving (lol) I'll be wanting the following:- 2 x 2" lifts, Kumho's probably, steering wheel, a bull bar likely, roof rails/rack, and whatever other little things will need doing.

I'll go pretty much anywhere down south to do it, but in any case another tech weekend shouldn't be too long away, however as mentioned there is pretty much an unlimited space available at the Devon place. However, as Surfenstein I think said - there's probably not much point working on too many cars at once (though you are welcome).

so sometime around 16/20th May for mine? fingers crossed

[mick p]

Just a though. Could some one film it then knock out the dvd's to cover costs? I would def buy one showing how to do a lift as I cant make the meet.

[Diezel Weazel]

right guys i think this is gonna get a little bit out of hand,the idea is to get a truck or a couple of trucks that want some work doing on them,then to get a few of us guys together for a wkend to sort the vehicles mentioned out.the biggest thing is to get the guys that want to learn how to do stuff together and show them how its done.there will be other wkends available at other venues.so basically lets not try and jam to much into one wkend.nigel can we use your workshop for the next tech wkend.?????

Mark seeing as ya overwelmed wiv Trucks cancel my invite as I may need to get me bearing done ASAP.
Cheers
Jess

There's always a Payback .... Ya just never see it Comin !!!!

[Woodzie]

Also interested in this any chance you may do the safari snorkel or tjm 1 for a 3rd gen?

Also what kind of prices for the set up at as i don't have a clue

This could be fun and a learning curve as you will be the first 3rd gen any of us have worked on

[Supertrux]

right guys i think this is gonna get a little bit out of hand,the idea is to get a truck or a couple of trucks that want some work doing on them,then to get a few of us guys together for a wkend to sort the vehicles mentioned out.the biggest thing is to get the guys that want to learn how to do stuff together and show them how its done.there will be other wkends available at other venues.so basically lets not try and jam to much into one wkend.nigel can we use your workshop for the next tech wkend.?????

Soz guys n gals
No room for a tech weekend at LAS for a while. Have all sorts of new kit being put in so space is at a premium.
I asked about the location of thei first one as I thought I might drop in and see how you guys lift a surf.
Woodzie any chance you could pm me your address??

regards Nigel

[hiroler]

I asked about the location of thei first one as I thought I might drop in and see how you guys lift a surf.

Thats a bit of a worry nigel as it was LAS who installed the lift on my surf!!!!

[Woodzie]

Soz guys n gals
No room for a tech weekend at LAS for a while. Have all sorts of new kit being put in so space is at a premium.
I asked about the location of thei first one as I thought I might drop in and see how you guys lift a surf.
Woodzie any chance you could pm me your address??

regards Nigel

we all get around it and lift

Nigel, i'll pm you my address

[Krayzy]

the official list.
1.surfenstein(full makeover)
2.apache
3.mudsurfer(balljoint spacers)
4.gwh 200(sunday if thats ok)
5.Diezel Weazel (Rear Hub seal)
6.joker(air con removal,rear shocks.)
7.captain chaos(hammer boy air con removal)
8.retribution(snorkle,breaks,l ift)
9.
10.
i dunno dave what is wrong with them.

Hello Stein,

I am a new member and have been getting quite a bit of help from Stormforce, he's been answering a few of my questions about a few issues I have. He mentioned you and said you may be able to help me. By the looks at all the Threads you seem to be 'Tha Man'.

I have noticed you are having a 'Stein'll Fix It' weekend. I would love to come and meet other Surfers and see how things are done. I love messing around with cars and doing little bits, but never had the knowledge or bottle to do major stuff.. Nearest i've got to it is building a 4x4 Mechano Set. lol.. ... So if there's still space, could you put me down for a visit. What is interesting me at the moment is getting a body lift. I did have a 2" sus lift so I could put some 33" on but i've tried my mates on and they are fine on the back but scrub the hell out of my mud-guard and the plastic arch's on my bumper.. So if you are fitting a body-lift kit or need a volounteer to fit some on his truck then i'm well interested.. Plus there's much more I want to learn.. Plus I enjoy a pint or three.. lol..

Many thanks.. Krayzy..

[surfenstein]

Hello Stein,

I am a new member and have been getting quite a bit of help from Stormforce, he's been answering a few of my questions about a few issues I have. He mentioned you and said you may be able to help me. By the looks at all the Threads you seem to be 'Tha Man'.

I have noticed you are having a 'Stein'll Fix It' weekend. I would love to come and meet other Surfers and see how things are done. I love messing around with cars and doing little bits, but never had the knowledge or bottle to do major stuff.. Nearest i've got to it is building a 4x4 Mechano Set. lol.. ... So if there's still space, could you put me down for a visit. What is interesting me at the moment is getting a body lift. I did have a 2" sus lift so I could put some 33" on but i've tried my mates on and they are fine on the back but scrub the hell out of my mud-guard and the plastic arch's on my bumper.. So if you are fitting a body-lift kit or need a volounteer to fit some on his truck then i'm well interested.. Plus there's much more I want to learn.. Plus I enjoy a pint or three.. lol..

Many thanks.. Krayzy..

good man.hi and welcome to the surf emporium of pleasure.put your name down on the list and you will be more than welcome.if you pm woodzie and just mention the tech wkend.im sure he will pm you his address.hopefully see you there.