yobit eobot.com

Announcement

Collapse
No announcement yet.

suspension lift

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • suspension lift

    hi guys
    not been on for a while since got new surf just completed suspention lift this weekend with 2inch rear springs from roughtrax and 1 and half inch front suspension spaces from 4crawler USA thing is the surf now sits too high at the front and would like it to sit level or slightly higher on the rear thaught about 2 inch spacers in rear but this would be too much any ideas i.e is there such thing as 1inch rear spring spaces many thanks

    D.Moore

  • #2
    Fit Land Cruiser springs, they give about 3" of lift, and cost about £45 at R/trax.
    Rob

    Still working for the man!

    Comment


    • #3
      Can you wind down the torsion bar to lower the front?

      Comment


      • #4
        Originally posted by plumb bob View Post
        Fit Land Cruiser springs, they give about 3" of lift, and cost about £45 at R/trax.
        Plumd bob
        where abouts on the site ive looked and cant see anything for land cruiser

        cheers
        mick

        Comment


        • #5
          Originally posted by nocatmcm View Post
          Plumd bob
          where abouts on the site ive looked and cant see anything for land cruiser

          cheers
          mick


          these are the springs??
          part no 003784

          http://www.milneroffroad.com/HDJ80.HTM
          Brian

          Comment


          • #6
            Originally posted by yoshie View Post
            these are the springs??
            part no 003784

            http://www.milneroffroad.com/HDJ80.HTM
            Oh, it might be Milners
            Rob

            Still working for the man!

            Comment


            • #7
              cheers

              Comment

              Working...
              X