Mitsubishi L200 Intercooler

[The Lang-Shankit Scunner]

I recieved this cooler today, and it only took 1.5 hrs to fit, supplied hose were enough to do the job, although had to upsize for the inlet manifould end.

Only had time for a wee spin, but i noticed a fair difference in performance. Straight line speed held no real differences, but climbing hills and working through the gears was much better, torqueyer if you like.

I would recommend this mod to anyone wanting to cool stuff down and get a bit extra performance aswell. Will post better stats when i have had longer to test her.

[MrE]

Sounds good, look foward to some pic's.
did the cooler cost much?

Mark........

[The Lang-Shankit Scunner]

No you can get them on ebay for about £50 - £70 with the piping.

[Apache]

I've got one of them, just need to get round to fitting (Bit different on the 3.0) and getting hold of a scoop that fits snugly.

Think mine only cost £15, nearly new, with all pipes and fan.

[Antshiel]

I recieved this cooler today, and it only took 1.5 hrs to fit, supplied hose were enough to do the job, although had to upsize for the inlet manifould end.

Only had time for a wee spin, but i noticed a fair difference in performance. Straight line speed held no real differences, but climbing hills and working through the gears was much better, torqueyer if you like.

I would recommend this mod to anyone wanting to cool stuff down and get a bit extra performance aswell. Will post better stats when i have had longer to test her.

You certainly don't mess around when it comes to gettin the job done. Well done mate.

I've got one of them, just need to get round to fitting (Bit different on the 3.0) and getting hold of a scoop that fits snugly.

Think mine only cost £15, nearly new, with all pipes and fan.

I've got a trooper one sat here if you want it. Its got a crack on the lower front bit which wont be seen when it's fitted, or can be easily repaired with a soldering iron or super glue.
PM me if you want it.

[Apache]

You have PM, you star!

[mick19691]

l200 intercooler

iv got one with all the pipes i think i spoke to you before about it what size pipe did you have to get for the inlet
thanks
mick

[RodLeach]

C'mon Carl mate! PICS man PICS!


Intercooler bits are on ze list for bits to order next week

[logey79]

pics needed of the intercooler. is it a top mount or what?

[The Lang-Shankit Scunner]

Yes its a top mount, ill start a threda wiv pics tommorow after takin some pics, to upsize i used the current rubber connector, and put intercooler hose inside it with a strong metal ring inside that so i could jubilee it down tight.

[POPEYE]

Is it like this one Carl? i was told this was off a mitzi L200

[The Lang-Shankit Scunner]

no mate its this one

[The Lovely Boyo]

This is what mine looked like, which is the stripped out version lol

[POPEYE]

Right! that's different, thought it funny when you said it was fitted in 1 1/2 hours, i had a hell of a job and a small fortune in hoses, wot the feck's mine off then?

[The Lang-Shankit Scunner]

Mines much the same, finally a pic for ya.