Just look at the art work A1

[Highlander1]

Andy

Amazing I decided they were so good to put it on the bonnet and spread it a wee bit cos my doors are half grey with the rubber trim running half way down.

I made a mistake measured twice but then it was windy and the graphic made contact onthe bonnet before I was lined up completley so the Bed and www. are too far apart but when your standing on the ground it doesn't show.

Pictures taken from upstairs window.

I am over the moon with these. If you can make smaller ones for the door panels a set for passanger and for drivers doors it will look the muts nuts.

Can't thank you enough Mrs H wanted the phone number where it is can't argue with her she makes the Beds.

pm me with cost for the doors I'm thrilled with what you have achieved.

top man

[Highlander1]

Andy

Amazing I decided they were so good I put it on the bonnet and spread it a wee bit cos my doors are half grey with the rubber trim running half way down.

I made a mistake measured twice but then it was windy and the graphic made contact on the bonnet before I was lined up completley so the Bed and www. are too far apart but when your standing on the ground it doesn't show.

Pictures taken from upstairs window.

I am over the moon with these. If you can make smaller ones for the door panels a set for passanger and for drivers doors it will look the muts nuts.

Can't thank you enough Mrs H wanted the phone number where it is can't argue with her she makes the Beds.

pm me with cost for the doors I'm thrilled with what you have achieved.

top man

ps I like the contrast with the Highlander one you did earlier.

[gwh200]

very nice graphics,nice colour truck too

[Apache]

John, get yourself a hardcover for the spare, and use the other one on there.

The door ones shouldn't be a problem, see your PM later.

[Highlander1]

I didn't think of that one Andy Birthday coming up and all that better start hinting to the MRS.

Thanks JB

[Highlander1]

John, get yourself a hardcover for the spare, and use the other one on there.

The door ones shouldn't be a problem, see your PM later.

Wheel cover ordered and paid for already!
just waiting for the post.

I might even spray the cover to match the truck or would that be too hairdresser- ish

[BEAST]

Looks like an awesome place that. Near the coast and with mountains too.

[Tiger]

[QUOTE=Highlander1]Andy

Amazing I decided they were so good to put it on the bonnet and spread it a wee bit cos my doors are half grey with the rubber trim running half way down.

I made a mistake measured twice but then it was windy and the graphic made contact onthe bonnet before I was lined up completley




If you make up a week fairy liquid solution and wipe over the vehicle panel (not saturate)first then when you put the stickers on they donot stick instantly and you can actually move them around abit if required then wipe over the top with a wet sponge to get out the air bubbles. perfect result no cockups. I was shown this by a sign writer and i have done all my trucks

[Highlander1]

Cheers Tiger

It was that dam windy today my impatience got the better of me. Still everyone whose come to the house so far has been asked what's wrong and no ones spotted it yet.

Everyone thinks it's ace.

[smiffy]

Top job. Cant see anythin wrong with it

[stormforce]

its been many years since i was up at Glencoe and looking forward to go back there some day.
The artwork looks ###### good john

[Apache]

John, I take it the ones you want for the doors , you just want above the plastic rubbing strip? I'll nip out and measure.

[Highlander1]

its been many years since i was up at Glencoe and looking forward to go back there some day.
The artwork looks ###### good john

Thanks all down the the man Apache "mexican wave smiley".

You should get up here if you can Aprils our summer with no midgies it's normally a great time of the year. Hope you can make it sometime.

Cheers JB

[Highlander1]

John, I take it the ones you want for the doors , you just want above the plastic rubbing strip? I'll nip out and measure.

Yes please things just get better and better can't wait for my wheel cover. I can't decide if i should spray it the same cloour as the truck or leave it black.

Thanks Andy.

[Scorpion]

John, graphics look fantastic mate. Only thing is, I think it would look better if your 'Highlander' sticker was gold too! Just my opinion mate, no doubt someone will come along shortly and put me in my place.