Help needed from the Shiny Club (veg oilers)

[madcampbell]

It also depends where it is leaking from

I'll be putting another pump in mine in the over two weeks

There is so much Cr@p all over the engine bay how do you find the leak..quick easy way of cleaning the engine?

[darkdezigns]

There is so much Cr@p all over the engine bay how do you find the leak..quick easy way of cleaning the engine?

see a valeter,jet wash 180 deg with neat tfr/truckwash=new look engine

[madcampbell]

see a valeter,jet wash 180 deg with neat tfr/truckwash=new look engine

Cheers

[darkdezigns]

Cheers

no worries u cud diy it at a car jet wash,but wont get as clean,just approach a valeter with a couple of quid

[POPEYE]

It seems the most common place it starts to leak is from the top cover, mine started leaking on a 50/50 mix, i've dropped it down to 20/80 (roughly) and the leak's stopped, some add a lt of unleaded or white spirit to the veg to thin it out, and ease the load on the pump, as for cleaning the $hite off, washing up liquid scrubbed on and polish after

[madcampbell]

It seems the most common place it starts to leak is from the top cover, mine started leaking on a 50/50 mix, i've dropped it down to 20/80 (roughly) and the leak's stopped, some add a lt of unleaded or white spirit to the veg to thin it out, and ease the load on the pump, as for cleaning the $hite off, washing up liquid scrubbed on and polish after

Thanks All

I will;
1 Get Engine cleaned
2 Trace leak
3 Fix leak (hopefully)
4 Become a temporary member of the shiny club and Clean Truck
5 Thin Veg oil with WS

[darkdezigns]

permanant member surely?

[POPEYE]

Thanks All

I will;
1 Get Engine cleaned
2 Trace leak
3 Fix leak (hopefully)
4 Become a temporary member of the shiny club and Clean Truck
5 Thin Veg oil with WS

You'll have to sign'd in by a member and pay ya £1,

The lang shanket scunner give me some info on doing the top seal, it can be done in situ once all the filter and gubbins have been removed so you can see it, the new seal is about £14 from milners and you'll need a "o" ring for the top sensor (B&Q) o ring pack, if it's the front or back one , i dont know, think it's pump out job and all sort's of aggro, recalibration etc, TonyN'll prob be the man for that