diff breathers

[gwh200]

cos he upset so many people with he;s gay impersonater

never upset no one

all the bigots/homophobes/nazi's did that withsome seriously nasty posting

[Antshiel]

It was just an impersonation then, oh well!!!

diff breathers? is that front and back? wot about the one on the gearbox?
i managed to find a couple of air fittings that went straight in (need another one for the box) and teed in the fuel tank and fan, just need to do the veg tank,

I still haven't done the front diff let alone all them you've got piped up. Is there a breather on the centre diff?

[gwh200]

yes yes yes.........


no.


we have no centre diff

[Antshiel]

yes yes yes.........


no.


we have no centre diff

i got one, it's in the middle of the front one and the back one me thinks

[yoshie]

i got one, it's in the middle of the front one and the back one me thinks

Show off but I bet you would rather have chrome bumpers

[Antshiel]

Show off but I bet you would rather have chrome bumpers

Oh yes! and mirrors and a second gen shell. I have got a real hand brake though!

[plumb bob]

I got the same kit from gupster, but I don't think the front one will fit on my diff, as there is not enough room the for the elbow to turn a full 360, as the breather is set lower than the top edge

[joker??]

I got the same kit from gupster, but I don't think the front one will fit on my diff, as there is not enough room the for the elbow to turn a full 360, as the breather is set lower than the top edge

????//

[MattF]

I got the same kit from gupster, but I don't think the front one will fit on my diff, as there is not enough room the for the elbow to turn a full 360, as the breather is set lower than the top edge

The elbows usually rotate independently from the nut, so it should go on fine.

[plumb bob]

The elbows usually rotate independently from the nut, so it should go on fine.

Oh, ok, I haven't actually put any tools on it yet, I did wonder if that might be the case, but they wouldn't turn independantly by hand so I thought they might be fixed.

I'll try it at the weekend, when I get time.

[MattF]

Oh, ok, I haven't actually put any tools on it yet, I did wonder if that might be the case, but they wouldn't turn independantly by hand so I thought they might be fixed.

I'll try it at the weekend, when I get time.

If it snaps, I was wrong.

Edit: Have you got one straight and one right angled, or are both connectors elbows?

[plumb bob]

If it snaps, I was wrong.

Edit: Have you got one straight and one right angled, or are both connectors elbows?

Both elbows

[fatfires]

Both elbows

same as mine, gupster reccons that is what is needed if no lifts - mine are still in the bag, oh yes I think gupster is out of big cable ties - or he forgot to put them in the bag!!

[sv1000spilot]

Got mine yesterday when Drunkmonkeyboy brought them round. Unfortunaltly instead of fitting them as we both planned to do we went off-roading instead