1" body lift.

[RodLeach]

Does anyone make a 1" body lift? Or is milners 1.5" my best hope?

Planning on putting on some more inches along with the large sus lift.

[stormforce]

Does anyone make a 1" body lift? Or is milners 1.5" my best hope?

Planning on putting on some more inches along with the large sus lift.

Talk to the good Dr.Angle grinder he may be able to sort you out

[RodLeach]

just checked out 4crawler, Its like £20 + del.

[stormforce]

just checked out 4crawler, Its like £20 + del.

is that for everything you need tho Rod?Rad drop brackets etc

[RodLeach]

is that for everything you need tho Rod?Rad drop brackets etc

Its the spacers and longer bolts, I dont need bumper relocation brackets etc. Im going to lift the bumper 1" from its mounts and weld in all up rather then the TJM bolts.

From what i gather the rad should be ok with a 1" drop, if its not... It wont take two minutes to fabricated somet up! Between my Dad an my uncle i have access to pretty much any tool. Which comes in blo*dy handy!

[stormforce]

Its the spacers and longer bolts, I dont need bumper relocation brackets etc. Im going to lift the bumper 1" from its mounts and weld in all up rather then the TJM bolts.

From what i gather the rad should be ok with a 1" drop, if its not... It wont take two minutes to fabricated somet up! Between my Dad an my uncle i have access to pretty much any tool. Which comes in blo*dy handy!

thats ok then.i would hate for you to fof lifted the body and found that you needed rad brackets also

[RodLeach]

thats ok then.i would hate for you to fof lifted the body and found that you needed rad brackets also

Would be a kick in the nuts!!

in fact, These kits would probably be for the 3.0V6 4runner, to be honest, that radiator could be completly different....Hmmmn


Well done Rich!! I think i might check his prices for the rad drop brackets, if they aint mega bucks, I might order some up to save time on making them.

[TonyN]

in fact, These kits would probably be for the 3.0V6 4runner, to be honest, that radiator could be completly different....Hmmmn

No different to how the brackets work.

[stormforce]

Would be a kick in the nuts!!

in fact, These kits would probably be for the 3.0V6 4runner, to be honest, that radiator could be completly different....Hmmmn


Well done Rich!! I think i might check his prices for the rad drop brackets, if they aint mega bucks, I might order some up to save time on making them.

i thought that with whatever lift on the 2.4's you needed to adjust the rad.Its only the 3.0l you can get away with no rad drop brackets.

Make sure you loosen off any brake lines etc that may clip to the under body and to the rear axel so nothing gets stretched and damaged

[RodLeach]

No different to how the brackets work.

ah, i meant the rad cap etc, If the cap is in the rad on the 4Runner then 4crawler might state its not nessesary to drop the rad. But where mine is on my 2.4 ... it could cause some issues?!?

[RodLeach]

Just checked, the brackets on 4crawler are about £15, I think i might make some up.

[TonyN]

ah, i meant the rad cap etc, If the cap is in the rad on the 4Runner then 4crawler might state its not nessesary to drop the rad. But where mine is on my 2.4 ... it could cause some issues?!?

Dosn't really matter, you need the rad drop brackets so the fan dosn't make a mess of the fan shroud when you start it up!!!

[RodLeach]

Dosn't really matter, you need the rad drop brackets so the fan dosn't make a mess of the fan shroud when you start it up!!!

ohh.... Fair enough! I'll sort them out then! Cheers Tony.