ive been busy with the disc cutter today. and i must say it looks pretty darn good.
Announcement
Collapse
No announcement yet.
Bobbed Stein
Collapse
X
-
Originally posted by MudSurferMark, when do you fit the exo cage, and row of lights front and rear????
iously i was only winding you lot up,i havnt started yet.ive just taped the cutting lines on stein.i have to look at cutting the chassis and bringing the whole tail section forward by 2 feet.it is quite a lot of work but once i cut there is no going back.so i will strip the inside out and have a look at the roof reinforcing bars and other bits and pieces.Last edited by surfenstein; 2 September 2007, 18:53.www.overfab.uk
Comment
-
Originally posted by surfensteini'll do that tommorrow.hehehehehe.no ser
iously i was only winding you lot up,i havnt started yet.ive just taped the cutting lines on stein.i have to look at cutting the chassis and bringing the whole tail section forward by 2 feet.it is quite a lot of work but once i cut there is no going back.so i will strip the inside out and have a look at the roof reinforcing bars and other bits and pieces.Only Toyota can get you out of shite
Comment
-
Originally posted by gwh200do you know wht,
this trhread turned into a monster. i stay off the puter for one day and come back, slowly descending into anarchy.
mark the answer is simple
BOBTAIL WOODZIE
www.daemon4x4.org
Comment
Comment