If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Mark, when do you fit the exo cage, and row of lights front and rear????
i'll do that tommorrow.hehehehehe.no ser
iously i was only winding you lot up,i havnt started yet.ive just taped the cutting lines on stein.i have to look at cutting the chassis and bringing the whole tail section forward by 2 feet.it is quite a lot of work but once i cut there is no going back.so i will strip the inside out and have a look at the roof reinforcing bars and other bits and pieces.
Last edited by surfenstein; 2 September 2007, 18:53.
i'll do that tommorrow.hehehehehe.no ser
iously i was only winding you lot up,i havnt started yet.ive just taped the cutting lines on stein.i have to look at cutting the chassis and bringing the whole tail section forward by 2 feet.it is quite a lot of work but once i cut there is no going back.so i will strip the inside out and have a look at the roof reinforcing bars and other bits and pieces.
ok i think ive worked everything out,how and where im gonna cut it.i'll leave it now until i return from cornwall then i'll start cutting and shutting,that is of course if i havnt got to rebuild the 1st gen when we get back.im looking forward to the challenge.
Comment