Tweet
Can you guys point me in the direction of somewhere I can buy pipes from that I can use to fit the intercooler I've bought. The bore sizes on the unit are both 45mm approx - so I assume I'm going to need something to make it all fit - any ideas????
-
Too old to care, young enough to remember -
and also (soory to hijack this thread....but i'm an expert at it) can peeps please stop changing their names...it gives me an almighty gublogenouesiouesiouious headache! sure i've made that point before but hey ho!
anyway...help this geezer with his damned pipes will ya!!!! jeeez!!!! takes forever to get any help on this tiny planet....i swear, it was like that when i got here...Comment
-
Apologies Linkmeister General!Originally posted by BUSHWHACKER
45 pages????
Are there pipes that can be one size at one end, and bigger at t'other?
(Doh! - Page 2)Too old to care, young enough to rememberComment
-
my pipes are like that !!!!!! whooohaaaayyy!!!Originally posted by MudSurfer
seriously, yeah they can be.i swear, it was like that when i got here...Comment
-
Can you let me know which ones I will need to connect the intercooler??
TIAToo old to care, young enough to rememberComment
-
From bottom left, going clockwise,Originally posted by MudSurfer
2x 50mm 90deg elbows, 1x 50mm 135 deg elbow, 1x 50mm elbow, 1x 63mm to 50mm reducing elbow
All connected with 50mm tube (sawn up exhaust pipe!). You will need to file grooves around the steel pipe to help hold the hoses in place - they'll blow off if you don't.
And if you're wondering, I canted it to the right to keep it away from the turbo.
EDIT - The link Vince posted is the best price I've seen - buy now!Last edited by The Lovely Boyo; 27 April 2007, 12:03.Another member of the 'A' teamComment
-
Let's measure up and agree tomorrow as I haven't bought the same intercooler as you!Originally posted by The Lovely BoyoFrom bottom left, going clockwise,
2x 50mm 90deg elbows, 1x 50mm 135 deg elbow, 1x 50mm elbow, 1x 63mm to 50mm reducing elbow
All connected with 50mm tube (sawn up exhaust pipe!). You will need to file grooves around the steel pipe to help hold the hoses in place - they'll blow off if you don't.
And if you're wondering, I canted it to the right to keep it away from the turbo.
EDIT - The link Vince posted is the best price I've seen - buy now!Too old to care, young enough to rememberComment
-
So what is the plan for tomorrowOriginally posted by MudSurferwww.daemon4x4.orgComment
-
Well, until this evening, the plan was to do the rear shocks and springs and fit the lift kit - fit the mesh grille and see what else we can get done...Originally posted by Woodzie
BUT THEN - DISASTER STRUCK!!!
The rear prop UJ blew on my way home, so I need to sort that out - I may just drop the rear prop and put it in 4WD and drive down anyway - see if I can sort something out later with the UJ
I will be there, but about lunchtime now, instead of mid morning (13:00 ish)Too old to care, young enough to rememberComment
Comment