yobit eobot.com

Announcement

Collapse
No announcement yet.

Just Bought These Wheel Spacers.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The ones i got were 30mm and come with nuts, i've not had any probs with em at all,
    So 33's ok with a 2" body lift? or not
    I used to get a little rub on a mud flap bolt when i put the 31's on but that was before the lift,
    Jim! if yours dont have nuts with em i think i got some spare ones, their bevelled dome type ones so better check if they'll do,
    Too young to die and too old to give a toss

    Comment


    • #17
      The spacers I sell come with all the nuts, I'd expect them all to to be honest.

      Originally posted by plumb bob

      On that subject, whats your opinion regarding repair/replacement of mu fuel pump, the leak appears to be from the joint where the distributor block joins the pump body, its an "o" ring.
      according to shop manuals I have, its a f**ker and looks quite scarey and the pump needs resetting if you disturb it.

      I have an old half dismantalled knackered non-efi pump, I'll pop the back off and see what falls out.
      4x4toys.co.uk - Keeping you on and off the road...

      Comment


      • #18
        Thanks Tony, I've just been on the au site and seached, they seem to tink part no. 22100-5B300 will fit, but I could find no definate answer, apart from this pump is only AU$350 ( or $2250) if you buy in NZ and from toyota uk it's £2250.00 +VAT (ouch)

        So if I can find a definate part no for my pump it'l be worth getting it from Aus.

        http://www.hiluxsurf.co.uk/forums/sh...ad.php?t=32502

        http://www.toyotasurf.asn.au/forum/v...ight=fuel+pump
        Last edited by plumb bob; 14 April 2007, 23:37.
        Rob

        Still working for the man!

        Comment


        • #19
          Originally posted by ian619
          The ones i got were 30mm and come with nuts, i've not had any probs with em at all,
          So 33's ok with a 2" body lift? or not
          I used to get a little rub on a mud flap bolt when i put the 31's on but that was before the lift,
          Jim! if yours dont have nuts with em i think i got some spare ones, their bevelled dome type ones so better check if they'll do,
          Cheers Ian, I can't see any nuts on the pic on ebay and it doesn't say they're included so I'll just have to wait and see. Will be in touch if I need them mate and thanks again for the offer.
          'Tis better to sting than to be stung!

          Comment


          • #20
            They should come with the nuts to bolt the spacer to the hub and then use your wheel nuts to bolt the wheels on as usual . These are the same make as Tony sells and mine came with nuts
            Rick...Member of 1st Gen club. ONE LIFE ... GET ONE !!

            Comment


            • #21
              Originally posted by ian619
              The ones i got were 30mm and come with nuts, i've not had any probs with em at all,
              So 33's ok with a 2" body lift? or not
              I used to get a little rub on a mud flap bolt when i put the 31's on but that was before the lift,
              Jim! if yours dont have nuts with em i think i got some spare ones, their bevelled dome type ones so better check if they'll do,
              I dont think they fit without the extra 2" lift!! Its strange though ive seen loads of USA/Aussy surfs running on a 2" body lift with 33's an "dandownunders" hilux had No lift at all and was running on 33's!

              I can only assume its just for steering! Not as if there are many curved roads in the US of A !

              Comment


              • #22
                Originally posted by RodLeach
                I dont think they fit without the extra 2" lift!! Its strange though ive seen loads of USA/Aussy surfs running on a 2" body lift with 33's an "dandownunders" hilux had No lift at all and was running on 33's!

                I can only assume its just for steering! Not as if there are many curved roads in the US of A !


                Depends on wheel off-set also.

                Comment


                • #23
                  Originally posted by BUSHWHACKER
                  Depends on wheel off-set also.
                  good point! I didnt think about that!! Plus Ian the extra 2" suspension lift just makes it look that much more "complete" It just beefs it up so much more!! You can get the coil spacers from 4crawler! Shocks from TonyN and i do believe bushwhacker does the other bits n bobs!! its a Few hundred ££ to get it all done but the end result is nice!! I cant wait to get mine sorted!! Its just hard to accept the £500 odd charge that will be coming up later for the BFG 33's!

                  Comment


                  • #24
                    I doubt the'll fit then with just a body lift, the wheels i got now have more off set than the originals, could do with borrowing a couple to try it,(when its back on the road) would like to do a suspension lift as well but for two things, getting it in the garage and the missis getting in the truck,
                    Too young to die and too old to give a toss

                    Comment


                    • #25
                      Yippeeeeee! They're here! Now comes the long wait until the weekend when I can get them fitted. Ian, thanks for the offer of the wheel nuts mate but the spacers did come supplied with them.
                      Last edited by Scorpion; 17 April 2007, 20:27.
                      'Tis better to sting than to be stung!

                      Comment


                      • #26
                        Originally posted by Copycat
                        Yippeeeeee! They're here! Now comes the long wait until the weekend when I can get them fitted. Ian, thanks for the offer of the wheel nuts mate but the spacers did come supplied with them.
                        Thought they would but ya welcome! the old surf'll look a bit meaner with em on,
                        Too young to die and too old to give a toss

                        Comment

                        Working...
                        X