does any body know

[BIG GENERAL]

looking under the bonnet today there was a black plastic plug about 2.5" long with two wires coming out of it that tapers down to a rounded nipple its on the left hand side by the air filter box does anybody know were it fits or does it just hang down cannot post pic till wife comes home and shows me how to do it many thanks

[Ballibeg]

Sounds like air temp sensor, goes in hole on side of air filter box.

Dave

[BIG GENERAL]

thanks for that ballibeg back in know dont know how long thats been out

[Ballibeg]

I found mine after I'd had the truck for a month or so. Slotted it back in but I couldn't notice any difference in the way it ran!

Dave

[The Hornet]

What happens with this sensor if you replace the filter with one of the induction style ones. Do you strap it to it cut it off?

[Taliesins]

What happens with this sensor if you replace the filter with one of the induction style ones. Do you strap it to it cut it off?

Drill a hole put the Rubber grommet in it and fit the sensor easy.
Thats what I did with mine.

[TonyN]

What happens with this sensor if you replace the filter with one of the induction style ones. Do you strap it to it cut it off?

I used the original elbow of the old filter box lid......

[sledge]

so why have i not got a sensor on my air filter?

[paulh]

so why have i not got a sensor on my air filter?

Cause it's burgundiddly

[MattF]

2L-T, by any chance?

[BUSHWHACKER]

so why have i not got a sensor on my air filter?

It might be dangling down in the engine bay somewhere. Without one, I would have thought your MPG would be bad!