yobit eobot.com

Announcement

Collapse
No announcement yet.

Diff breather quickie

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Diff breather quickie

    Going to tackle these in a bit. Is there any problem with putting the end of the breather pipe inside the vehicle? Do the breathers vent heavily?

  • #2
    Originally posted by MattF
    Going to tackle these in a bit. Is there any problem with putting the end of the breather pipe inside the vehicle? Do the breathers vent heavily?
    there is a few that have the rear breather inside so it should be ok Matt.
    I just bought the pipe to do mine but will tackle that during the week
    https://www.facebook.com/groups/henpals/

    Comment


    • #3
      I just ran mine up int the engine bay , if you put them inside its another hole to seal
      www.daemon4x4.org

      Comment


      • #4
        Originally posted by Woodzie
        I just ran mine up int the engine bay , if you put them inside its another hole to seal
        It's me. That'd be too easy. Was gonna' feed it in through that large rubber grommet in the rear passenger side panel. Just didn't want to risk gassing everybody.

        Comment


        • #5
          Originally posted by stormforce1067
          there is a few that have the rear breather inside so it should be ok Matt.
          I just bought the pipe to do mine but will tackle that during the week
          You're as bad as me for tootling round to jobs.

          Comment


          • #6
            Originally posted by MattF
            You're as bad as me for tootling round to jobs.
            i bought a can of underseal a couple of days ago and only managed to do the 1 wheel arch then had to give up....
            https://www.facebook.com/groups/henpals/

            Comment


            • #7
              Originally posted by MattF
              It's me. That'd be too easy. Was gonna' feed it in through that large rubber grommet in the rear passenger side panel. Just didn't want to risk gassing everybody.
              I did send you enough hose to run the rear one to the engine bay ......but you will have more fun (not) and cut knuckles doing the front one due to the aircon rad
              www.daemon4x4.org

              Comment


              • #8
                Originally posted by Woodzie
                I did send you enough hose to run the rear one to the engine bay ......but you will have more fun (not) and cut knuckles doing the front one due to the aircon rad
                Cheers. Scare the cr@p out of me. Just thought it'd be safer inside with Mr Cr@p Luck on the loose. You're talking to the bloke who would put his diff breather in the engine bay then flood the engine bay. Besides, it'll give me an excuse to use that poncy filter I have knocking about.

                Comment


                • #9
                  Originally posted by stormforce1067
                  i bought a can of underseal a couple of days ago and only managed to do the 1 wheel arch then had to give up....
                  Ohhhhhhhhhhh, that's bad. Even I'm not THAT bad.

                  Comment


                  • #10
                    Originally posted by MattF
                    Ohhhhhhhhhhh, that's bad. Even I'm not THAT bad.
                    im saying nothing.the tardis has broke.
                    www.overfab.uk

                    Comment


                    • #11
                      Originally posted by vatchman
                      im saying nothing.the tardis has broke.
                      its alright tho Mark cause there's no nuts and bolts involved so i should be ok
                      https://www.facebook.com/groups/henpals/

                      Comment


                      • #12
                        Originally posted by vatchman
                        im saying nothing.the tardis has broke.

                        Comment


                        • #13
                          Originally posted by stormforce1067
                          its alright tho Mark cause there's no nuts and bolts involved so i should be ok
                          yea but i bet you broke the lid trying to get it off though didnt you.
                          www.overfab.uk

                          Comment


                          • #14
                            Originally posted by stormforce1067
                            its alright tho Mark cause there's no nuts and bolts involved so i should be ok
                            Get ready for Richard saying he's snapped his diff breathers then.

                            Comment


                            • #15
                              Originally posted by MattF
                              Get ready for Richard saying he's snapped his diff breathers then.
                              i can picture the scene now.
                              www.overfab.uk

                              Comment

                              Working...
                              X