Urgent: Steering Geometry.

[plumb bob]

Morning all need help with figures, I have some figures that I found elsewhere on the forum, but my mech says he needs to know if they are in inches, mm or degrees, or 1/100th of degrees.

Figures are listed in technical mechanical if you need a look.

Any help appreciated!!

[marky]

If your mech is any good he should know the difference

[andy]

My Autodata say's.

Vehicle Unladen
Toe in (N= negative,toe out) mm 0.10-2.10
Toe in deg 0.1'-0.21'
Toe in 1/100 deg 0.02-0.35
Camber deg 0.12'-1.12'
Camber 1/100 deg 0.20-1.20
Castor deg 1.19'-2.19'
Castor 1/100 deg 1.32-2.32

Hope this makes sense.

[plumb bob]

thanks for that, I'll pass that on to him.

He has told me tonight that the inner track rod end and the steering idler are too worn to set up so i'll have to get new ones.