tweaking

[BUSHWHACKER]

Do you mean 3 washers total, I assume that you don't mean 3x3 i.e. a spacing of 9 mm in all. Sorry if this seems an odd question but have not taken cover off so don't know what is inside.

Thanks

Yeah, I just re-read that post and it does look confusing.

One washer, or two together, totaling 3mm behind each bolt.
In other words, you want to space the plate away from the turbo 3mm.
(or more as long as you have a boost gauge fitted and you can monitor the boost pressure)

[beaufighter]

Yeah, I just re-read that post and it does look confusing.

One washer, or two together, totaling 3mm behind each bolt.
In other words, you want to space the plate away from the turbo 3mm.
(or more as long as you have a boost gauge fitted and you can monitor the boost pressure)

Smashing. Thanks for your help Vince. Sorry one more thing, wheredo I get and how should I fit a boost guage. Is it a permanent fixture or a tool. Is it similar to a vacuum Gauage that I have fitted to inlet manifolds in previous petrol cars?

[The Hornet]

3X1MM.
I'm useless with numbers. There's 3 kinds of people in this world: those who can count and those who can't.

[POPEYE]

Smashing. Thanks for your help Vince. Sorry one more thing, wheredo I get and how should I fit a boost guage. Is it a permanent fixture or a tool. Is it similar to a vacuum Gauage that I have fitted to inlet manifolds in previous petrol cars?

As Vince seems to be off line, yep very like a vacum gauge, its the one in the middle in the pic, very easy to fit, small pipe tees in and the lighting to the dash lights circuit, I'll get a pic of the connection in the morn but there's info on here about that,

[beaufighter]

3X1MM.
I'm useless with numbers. There's 3 kinds of people in this world: those who can count and those who can't.

No worries, wonder what would have happened though if I had gone the whole 9mm?

[beaufighter]

As Vince seems to be off line, yep very like a vacum gauge, its the one in the middle in the pic, very easy to fit, small pipe tees in and the lighting to the dash lights circuit, I'll get a pic of the connection in the morn but there's info on here about that,

Thanks for the help. Dash looks good but what are your other guages? I know you said more pics from morning so please would you include where the engine side of pipe goes.

Thanks

[POPEYE]

Thanks for the help. Dash looks good but what are your other guages? I know you said more pics from morning so please would you include where the engine side of pipe goes.

Thanks

Sorry thats what i ment, i'll get a pic of where the tube connects tomorrow and a better one of the boost gauge, there's loads of boost gauges on the market,at verying prices, the other gauges in the pic are water temp and oil pressure, still aint got round to delving in to find the original sender tapping so i can connect the oil pressure one up,
Lot of guys fit em on the pillar (where i got my compass)

[beaufighter]

Sorry thats what i ment, i'll get a pic of where the tube connects tomorrow and a better one of the boost gauge, there's loads of boost gauges on the market,at verying prices, the other gauges in the pic are water temp and oil pressure, still aint got round to delving in to find the original sender tapping so i can connect the oil pressure one up,
Lot of guys fit em on the pillar (where i got my compass)

Nice one , thanks

[BUSHWHACKER]

No worries, wonder what would have happened though if I had gone the whole 9mm?

The red 'check' light will probably come on 'cos of over-boost and the ECU will cut power to the engine.

[POPEYE]

http://www.toyotasurf.asn.au/techsite/cheapboost.htm
http://www.toyotasurf.asn.au/techsite/boostguage.htm
Hope this works, better than any pic i can take

$hite!!! just noticed Vince already supply'd the cheap boost link so pardon me all over the place

[beaufighter]

http://www.toyotasurf.asn.au/techsite/cheapboost.htm
http://www.toyotasurf.asn.au/techsite/boostguage.htm
Hope this works, better than any pic i can take

$hite!!! just noticed Vince already supply'd the cheap boost link so pardon me all over the place

This is great thanks Ian I will hopefully sort it out next week. Sorry I have not replied sooner.