ATF hose bore?

[Apache]

Anyone know what the ID of the ATF cooler hose is?

[jotto]

3/8 or 10mm

[BUSHWHACKER]

It's only about 3/8" i think, certainly no more than 1/2"

[BUSHWHACKER]

It's only about 3/8" i think, certainly no more than 1/2"

Dammit!!!! I've been Jotto plodded!

[Apache]

Cheers.

Just did a quick scan for 5/8bsp to hose adaptors for my ATF cooler, but the ones I've seen are for 1/2" bore. Seen any for 3/8" bore?

[BUSHWHACKER]

You sure it's B.S.P ?

[Apache]

You sure it's B.S.P ?

Just an assumption from what the thread looks like - aren't most oil coolers BSP?

By the way, I have a handful of brand new 3/8 BSP to 3/8 hose fittings if anyone can use them. Guess I could put em on eBay...

[Chillitt]

and the next question, its the pipe on the nearside of the rad is the one to fit the extra cooler to..

[BUSHWHACKER]

Just an assumption from what the thread looks like - aren't most oil coolers BSP?

By the way, I have a handful of brand new 3/8 BSP to 3/8 hose fittings if anyone can use them. Guess I could put em on eBay...

It's just that there was a thread (hehehehe!!) on here recently about a rad supplied from Roughtrax, and that the cooler pipe adaptors were a fine thread.

[Apache]

It's just that there was a thread (hehehehe!!) on here recently about a rad supplied from Roughtrax, and that the cooler pipe adaptors were a fine thread.

Nah, this is an ex-oil cooler with pretty coarse threads.

[BUSHWHACKER]

Nah, this is an ex-oil cooler with pretty coarse threads.

Oh, OK. Carry on then!

[Apache]

and the next question, its the pipe on the nearside of the rad is the one to fit the extra cooler to..

Near to what? If you mean nearest to me, doesn't that depend on which side of the truck I get under?

I believe you should put it in the feed to the rad rather than the return so you take some heat out of it before it goes into the water rad?

[BUSHWHACKER]

Near to what? If you mean nearest to me, doesn't that depend on which side of the truck I get under?

I believe you should put it in the feed to the rad rather than the return so you take some heat out of it before it goes into the water rad?

Yeah, that's what he said.

[Chillitt]

Near to what? If you mean nearest to me, doesn't that depend on which side of the truck I get under?

I believe you should put it in the feed to the rad rather than the return so you take some heat out of it before it goes into the water rad?

yes. nearside is the kerb side, to avoid all them my left or your left mixups

[MattF]

Just did a quick scan for 5/8bsp to hose adaptors for my ATF cooler, but the ones I've seen are for 1/2" bore. Seen any for 3/8" bore?

Are you certain it's a 5/8 thread?