If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i started painting the chassis with hammerite and thought i might give the plate a different look just need to finish the rest of the painting now and when i snorkel is fitted does the areial need to be relocated
lol it was registered in this country in 2003 from japan or honk kong or some where far away and it still had all the original chassis paint on it so thought i might help it a bit by painting it but after wire brushing the mud dirt and any thing else that was on it the back end was painted enough i'm sure the front will cope with a mud paint
I thought about 6, but 6 x 8" wont fit, plus they are 130 watters, so thats potentially nearly 40 amps I need to deliver through the roof, which suggests pretty thick cables to avoid significant volts drop across that 8-10ft of cable.
That's cartloads. You're running under 30A of load. That'll be roughly 6mm
cable, then?
thats the one 6mm just done it bigger so if iwant to put bigger bulbs in i can prob will when they blow i found wiring them a bit of a fuss but got there they work jobs a gooden
Comment