If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If it was fitted properly I would advise you don't touch it yourself, or you could be stranded, cause when some of them shut down they really mean it, I know from experiance.
I would advise you talk to the people at Hodge Electrics, in Southampton, they have done all the alarm work on my car, and service the alarm for the insurance company every year, and it was them that the AA took it to when my alarm decided my car was being stolen so refused to take the imobliser off.
That looks like the type of imobiliser I used to have, where you touch the key on it and them have 30 seconds to start the car. It used to drive me mad, so I upgraded to a cat 1, remote alarm imobiliser, which also works the central locking, its so nice walk out front door press the fob, get in car wait for coil light to switch off, start engine, go. Mind you, you have to start within 20 seconds or the imobiliser cuts in again, and you have to open the drivers door within 2 minutes or it locks the car again.
You'll probably have to get it removed by the guys who install em, it aint easy, when the rover one kept killing the engine even the AA cant get the diagrams for em, there more trouble than their worth in my view, See you got the slaughter house interior then Dont ever throw up in there, you wont find it
You'll probably have to get it removed by the guys who install em, it aint easy, when the rover one kept killing the engine even the AA cant get the diagrams for em, there more trouble than their worth in my view, See you got the slaughter house interior then Dont ever throw up in there, you wont find it
http://www.frost.co.uk/item_Detail.asp?productID=8219 These guys do upholstery paint if you want a quick colour change , i got an inclinometer out of a red one, could'nt get a matching grey so i sprayed it satin black, looks ok, make sure you give it a coat of plastic primer first though or it will peel.
Comment