If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Not knowing what inside pump is exactly like, i am not sure, but i am sure if could be done, would be well worth while.
A peltier pump could also be a worthwhile consideration. That could be affixed
externally to the pump, with a suitable enclosure. They use the hot side/cold side
method.
Just pinched the exchanger out the old boiler before they cart it away in case i do this mod, gonna give it a good soaking and descaler first as it's been working in the boiler for about ten years and got to be pretty well limed up,
Just pinched the exchanger out the old boiler before they cart it away in case i do this mod, gonna give it a good soaking and descaler first as it's been working in the boiler for about ten years and got to be pretty well limed up,
Makes you wonder what some people think when they see us appropriating some
of our bits for our mods. Bicarb and vinegar should work wonders on that.
Makes you wonder what some people think when they see us appropriating some
of our bits for our mods. Bicarb and vinegar should work wonders on that.
HeHe i bet the old fart wonder's where the exchanger went when he get's here tomorrow, It's a big one, the old combie was a high output boiler, should warm up veg oil nicely
Comment