Any vinyl graphics printers on here??

[BUSHWHACKER]

I want to get some vinyl lettering made up like this....

INTERCOOLER TURBO

The font is 'wide latin' the letters are 30mm high, with 'Italic' slant and the whole thing is approximately 230mm long.
oh, and in silver, and I need two of them.

Cheapest I've found so far is £9 each!!!!!

Anyone help out a fellow helper?

[Linda]

I want to get some vinyl lettering made up like this....

INTERCOOLER TURBO

The font is 'wide latin' the letters are 30mm high, with 'Italic' slant and the whole thing is approximately 230mm long.
oh, and in silver, and I need two of them.

Cheapest I've found so far is £9 each!!!!!

Anyone help out a fellow helper?

Try Wacky Graphics - 01256 474274. Not sure on prices - but they come recommended.

[The Lovely Boyo]

I want to get some vinyl lettering made up like this....

INTERCOOLER TURBO

Hello Vince,

Does this mean you're gonna fit an intercooler then??????

Or are the stickers for another car?

[BUSHWHACKER]

Yep, got everything ready, just waiting for the silicone elbows to be delivered.

Gonna stick the graphics on the side of the scoop.

[The Lovely Boyo]

Yep, got everything ready, just waiting for the silicone elbows to be delivered.

What have you used to fix the insulation back onto the underside of the bonnet?

Mine is looking pretty shi*ty since I cut it out - and I gotta do before Cornwall - it's the only bit left for me to do so I can say job done!

It's the yellow stuff hanging down at the back of the cut hole.

[BUSHWHACKER]

I threw mine away a couple of years ago, I want to get rid of under bonnet heat, not keep it in with insulation. Didn't noticed and extra noise with it removed. (before I cut holes in the bonnet!)

[da SLUG man]

"hormygollop" on here used to do them on gere...
haven't heard from him for about 2 years though!!

might be worth a PM?

[Apache]

I want to get some vinyl lettering made up like this....

INTERCOOLER TURBO

The font is 'wide latin' the letters are 30mm high, with 'Italic' slant and the whole thing is approximately 230mm long.
oh, and in silver, and I need two of them.

Cheapest I've found so far is £9 each!!!!!

Anyone help out a fellow helper?

Shouldn't be £9 *each* Vince. Ours cost £60 for 8 2.5ft long in white and 1 4ft long one in silver.

The chap doing it told me setting up is what costs, not the material, so £9 each is excessive. If you give me an idea of size / font etc, I'll ask the chaps who did ours... in exchange for some instructions for the 'cruiser springs fitting kit

[BUSHWHACKER]

Yep I havn't forgotten, I'm putting together a photo guide for fitting all the parts. My truck is in the worshop in pieces!!!




p.s. INTERCOOLER TURBO

The font is 'wide latin' the letters are 30mm high, with 'Italic' slant and the whole thing is approximately 230mm long.
oh, and in silver, and I need two of them.

[Apache]

Yep I havn't forgotten, I'm putting together a photo guide for fitting all the parts. My truck is in the worshop in pieces!!!




p.s. INTERCOOLER TURBO

The font is 'wide latin' the letters are 30mm high, with 'Italic' slant and the whole thing is approximately 230mm long.
oh, and in silver, and I need two of them.

Will try to remember to pop in tomorrow and ask.

[BUSHWHACKER]

Cheers me old skipjack!

[The Lovely Boyo]

Hi Vince,

So what intercooler are you fitting, and in which direction/layout? etc etc

Info please...............

[BUSHWHACKER]

Mazda RX7, in the center of the bonnet, (see scoop pic) just two elbows needed to connect it up as it has the inlet and outlets facing downwards.
I was going to do a body lift, but went for a protruding scoop instead. With the bonnet shut, the intercooler is virtually sealed within the scoop, but I'll be sticking some sort of rubber seal around the edge so only the 'cooler gets airflow and not the engine bay.
Pics to follow...........

[Apache]

Went in this morning before I went to Yeovil, but the chap who did my stickers wasn't in. I'll go in tomorrow morning as I finish work at 11am before heading to Mousehole and the Old Coastguard Hotel later this weekend!

[stormforce]

Went in this morning before I went to Yeovil, but the chap who did my stickers wasn't in. I'll go in tomorrow morning as I finish work at 11am before heading to Mousehole and the Old Coastguard Hotel later this weekend!

hope you have a good time down here.The weather is sh1te at the moment,Saturday is meant to be the best day over the w/end