Anti Vibration Brackets

[Bludger]

How important is it to fit Anti-Vibration brackets when fitting spot lights?

I've just got the ones below which have rubber discs which tighten onto the top and underside of the bullbar.

Would these provide sufficient vibration reduction, or do you reckon I should get the proper brackets?

Thanks
Dave

[jotto]

How important is it to fit Anti-Vibration brackets when fitting spot lights?

I've just got the ones below which have rubber discs which tighten onto the top and underside of the bullbar.

Would these provide sufficient vibration reduction, or do you reckon I should get the proper brackets?

Thanks
Dave

Just bolt them on, They should be fine

[dirtydog]

Just bolt them on, They should be fine

like mine and yours you mean Jon,,,
mine wobble like mad at idle but no probs with them yet!

[AndyLala]

If the lights have provision for anti-vibration bracketry, then by all means if it makes you feel better, bolt them up...



but if its that bad... to vibrate the lights loose, then the lights will be the least of your problems...

[jotto]

like mine and yours you mean Jon,,,
mine wobble like mad at idle but no probs with them yet!

Mine only wobble when I go over big holes to fast

[jamsironwork]

looks like you have some of those angel eyes there, if it is make sure the seals are nice and tight i got some water in mine and rotted the led connection in about 3 months

[That Ruddy Squirrel]

looks like you have some of those angel eyes there, if it is make sure the seals are nice and tight i got some water in mine and rotted the led connection in about 3 months

I know the feeling, I have 1 with LED and 1 without

Still Hippo now has cruisin lights


Trev

[pops]

I know the feeling, I have 1 with LED and 1 without

Still Hippo now has cruisin lights


Trev

you need to take her to Doctor Tony
Hippo thinks its a Boat

[TonyN]

Mine only wobble when I go over big holes to fast

and the lights!

[fatfires]

and the lights!

thought we were in to nipples again!!!

[jamsironwork]

Trev look up www.phenoptix.co.uk for some new leds its easy to solder up some new ones and they are only held in the lamp with a blob of silicone

[That Ruddy Squirrel]

you need to take her to Doctor Tony
Hippo thinks its a Boat

Still got the Airhorn to fit (or is that foghorn ?), trying to work out best way to get at horn power feed without removing the grill.

Once I am happy with the positioning of my new spots will post up pics


Trev

[Vagrant No2]

Still got the Airhorn to fit (or is that foghorn ?), trying to work out best way to get at horn power feed without removing the grill.

Once I am happy with the positioning of my new spots will post up pics


Trev

I managed to get to the horn wires by taking out the osf side light unit .

[That Ruddy Squirrel]

I managed to get to the horn wires by taking out the osf side light unit .

What colour cables are they ?

Can the standard relay handle a twin trumpet airhorn ?


trev

[Vagrant No2]

What colour cables are they ?

Can the standard relay handle a twin trumpet airhorn ?


trev

I can not remember the colours , but I did fit a relay to the wires to operate the air compressor .