Springs

[Woodzie]

Just finnished putting new springs on the truck... what a difference its made got the roughtrax uprated ones will post photo tomorrow after we go out and bleed the brakes as had to disconnect the rear break line to fit the springs ....has any one else had this problem???

[BUSHWHACKER]

Nope. Did you disconnect the brake line to fit an extended one?

[Woodzie]

Nope. Did you disconnect the brake line to fit an extended one?

No must have a short flexable connection then ,the springs that came off were longer than the ones that went on and the rear is lifted

[TonyN]

Nope, I just unbolt the middle brake line brackets so the rubber hose isn't pulled tight when the axle is dangling on the radius arms.

[BUSHWHACKER]

I just made up a spacer for mine to keep the flexy hose.....err......flexy.

[Woodzie]

I just made up a spacer for mine to keep the flexy hose.....err......flexy.

I must say that this surf game is so much fun as no two ever appear to be the same .... Oh to be a japanese modification supplier ... i could make a fortune

[Diezel Weazel]

I must say that this surf game is so much fun as no two ever appear to be the same .... Oh to be a japanese modification supplier ... i could make a fortune

Like yer paintin Vince, the Colour suits yer .......Mods looks good too.......

There's alawys a Payback.... You just can't see it Comin !!!!

[BUSHWHACKER]

Cheers. There's more to come.

[Dog_Book]

Can you take a photo of the rear tyre and that square bung thing???? so i can compare when i jacked mine up to see what it would look like?

e.g...

[BUSHWHACKER]

No worries......

[Dog_Book]

No worries......

Thanks lol... that was the same as mine when i had those springs fitted....

Its those +2" lift coils i want the same pic of really.....ianwoodzie thanks

[Woodzie]

Finally found the camera and some working batteries.(camera just chews them since my lithum on died)...... Next projects are to replace the anti roll bar links as mine are on the way out , get a 2inch body lift off of danno and do the raised breathers just got to get some suitable air line

[dirtydog]

Finally found the camera and some working batteries.(camera just chews them since my lithum on died)...... Next projects are to replace the anti roll bar links as mine are on the way out , get a 2inch body lift off of danno and do the raised breathers just got to get some suitable air line

hose pipe?

[Woodzie]

hose pipe?

Its a idea as i have the fittings . What i was hoping to do was use 6 mm air line then tee the front and rear pipes bringing the breather up into the engine bay.

[Dog_Book]

Finally found the camera and some working batteries.(camera just chews them since my lithum on died)...... Next projects are to replace the anti roll bar links as mine are on the way out , get a 2inch body lift off of danno and do the raised breathers just got to get some suitable air line

Just one other thing.....could you measure the distance from the bottom of that square bung to the top of your rear tyre??? Thanks As it looks like your pics match mine when i measured the back end rising by only 1.5"..