If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pull up the two plastic things on the top of the seat. If these are broken, then there will be two holes in the top of the seat at either door. Get a long nose pair of pliers and pull the wire and pull the seat forward at the same time.
Pull up the two plastic things on the top of the seat. If these are broken, then there will be two holes in the top of the seat at either door. Get a long nose pair of pliers and pull the wire and pull the seat forward at the same time.
Cheers, ive done that part but just wondering how to get the seat which u sit on to come up so the back will become flat like a van.
Cheers, ive done that part but just wondering how to get the seat which u sit on to come up so the back will become flat like a van.
There should be two loops of seatbelt type material where the seatbelt clips come through the back of the seats. find these and give then a tug and you should be able to pull the seat bases up and forwards, then the seat backs will fold down flat.
Cheers, ive done that part but just wondering how to get the seat which u sit on to come up so the back will become flat like a van.
In the center of the seat part where it meets the back rest you should have a loop that releases the seat so it tips up to the back of the front seats, then the backs will fold down where the seats were. there are 2, 1 per side. If like mine you cant find them have a poke around down the crack between the seat and the back. often even after they have been pulled out they seem to find their way back in the crack. Once lifted you will also find the bottle type screw jack and long hooked jack bar.
In the center of the seat part where it meaats the back rest you should have a loop that releases the seat so it tips up to the back of the front seats, then the backs will fold down where the seats were. there are 2, 1 per side. If like mine you cant find them have a poke around down the crack between the seat and the back. often even after they have been pulled out they seem to find their way back in the crack. Once lifted you will also find the bottle type screw jack and long hooked jack bar.
Comment