Speedo replacement

[bolloxx]

I need to replace my speedo face for the SVA **spit**

my question is this....

Are there different types of speedo faces to replace the kmh one that is standard...?

And where is the best place to get such a replacement?

tia

[pops]

my surf went through SVA ok with Km speedo
but changed mine to MPH
got one off e-bay couple quids if i remember was not difficult to change over can also get stick on ones now too

[Draig]

ooops - wrong speedo's

[sim]

Yes I got mine from Ebay to, I paid 15 quid for it. Be very carefull when removing the needle, I very nearly snapped mine. But you can get the stick on type as well, I think these are 7 quid or so.

[That Ruddy Squirrel]

Warning guys,


Bolloxx has a 3rd Gen, you have 2nd Gens, the speedos are completely different.

I believe for 3rd Gens you can get gearings to set the speedos for the SVA.



Trev

[andy]

Any parts you need can be got from these people.

http://www.importedvehicles.co.uk/

[bolloxx]

Thanks for the reply fellas....

I'm gonna have a go at one of the geared speedo convertors...

save messing about with the needle....

"my stoopid fingers will bust it up badly"

[andy]

Thanks for the reply fellas....

I'm gonna have a go at one of the geared speedo convertors...

save messing about with the needle....

"my stoopid fingers will bust it up badly"

You dont need a geared speedo convertor, your speedo is electronic so will need a chip, see here http://www.importedvehicles.co.uk/ch...everything.htm

[bolloxx]

hehe.... im as green as grass..... does it show?

Thanks for that Andy...

any idea what price the chips are??

ty for your help m8

[sim]

Thanks for the reply fellas....

I'm gonna have a go at one of the geared speedo convertors...

save messing about with the needle....

"my stoopid fingers will bust it up badly"

Good idea, I nearly trashed mine. But if you do need one.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...sPageName=WDVW

[andy]

hehe.... im as green as grass..... does it show?

Thanks for that Andy...

any idea what price the chips are??

ty for your help m8

Around £75 I think, give them a ring http://www.importedvehicles.co.uk/

[kevbarry]

Try these £30.00.http://www.matlocksystems.com/. Make sure you get the one with the signal back to the ECU.

[bolloxx]

Spoke with http://www.importedvehicles.co.uk/ and couldn't get any sense out of the girl on the phone, she couldnt tell me how the thing was fitted. She reckoned it might need soldering but she couldnt say for sure.

Couldnt get hold of http://www.matlocksystems.com/ it was just an answering machine. Theres looks easier to fit and is £35 cheaper.