No announcement yet.

Milner's Rear diff extended breather for 3rd Gen

  • Filter
  • Time
  • Show
Clear All
new posts

  • Milner's Rear diff extended breather for 3rd Gen

    Has anybody tried it?

    I have made a few over the years using Toyota unions and some hose (fuel line etc). However the hose usually develops cracks and perishes after a year or so. Also is 2m long enough to get all the way to the engine bay?


  • #2
    That basic y what I use to supply. I still have some fittings in the garage. I think the diffs are 1/8 bsp then I used a 5mm push fit . To do the front diff you will need a elbow. Then the kit I supplied had a t so it could be linked and terminated in the engine bay or up the outside of the snorkel. R S do all the items and the pipe
    ' You've arrived on a rather special night. It's one of the master's affairs.'