yobit eobot.com

Announcement

Collapse
No announcement yet.

Unfortunately breaking my dear grey manual K-reg 2.4 SSR-X

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    a few other bits

    Originally posted by TobyJug View Post
    Hey mate,
    The aircon did work but the condenser ain't great as I have re-gassed a couple times..
    My mate re-gassed me for free at his work so I was not to bothered getting another condenser.. but this one looses the gas in about a month max... so no good....
    Sorry.
    Hi- no worries on the condenser. There's another couple of other silly bits i'm trying to get hold of - I need the positive battery terminal connectors (mine are both split on each battery and can't get them tight enoughg). Any chance you could let me have those? Also, -and I'm sure you'll laugh at this- I need the "T" from the TOYOTA badge on the rear door above the number plate. Some local kid nicked my T, so for the past year I've been driving a "TOYO'A" - any chance you could pull a T for me? Also our stubby antenna was damaged by hoodlums and can't get radio 2 any more - not sure how easy these are to remove but is yours any good and could you get it off complete with the wire? Let me know how much for these little bits and your paypal details if you can.

    Thanks! Bob

    Comment


    • #32
      Originally posted by Growler View Post
      Seats look to be in better condition than mine Toby. How are the bases when sitting on them as i find mine feel as though the springs have gone and not very supportive

      Andy
      Well mate to be honest they are more compfie then the red ones....
      I always found them confie so not sure what to say lol
      I do not think the springs are gone as u dont sink into them...

      Originally posted by jelsplace View Post
      Thanks for the exhaust Toby! Look forward to getting it through on my heap!
      No worries mate I will try and get off the flex too in a minute..

      Originally posted by bobby4star View Post
      Hi- no worries on the condenser. There's another couple of other silly bits i'm trying to get hold of - I need the positive battery terminal connectors (mine are both split on each battery and can't get them tight enoughg). Any chance you could let me have those? Also, -and I'm sure you'll laugh at this- I need the "T" from the TOYOTA badge on the rear door above the number plate. Some local kid nicked my T, so for the past year I've been driving a "TOYO'A" - any chance you could pull a T for me? Also our stubby antenna was damaged by hoodlums and can't get radio 2 any more - not sure how easy these are to remove but is yours any good and could you get it off complete with the wire? Let me know how much for these little bits and your paypal details if you can.

      Thanks! Bob
      Battery terminals u might be better just buying over the internet.
      My mate has some nice ones in his shop.
      Big ones gold plated.
      The are only about 4.99 each, so I can get them if u want.
      The toyota sign I will sell complete with the numberplate holder...
      otherwise I will be selling a oyota part...
      But if it ends up going to scrap before I will take it off for u no worries
      The aerial, do u mean u want the whole aerial?
      Last edited by TobyJug; 28 July 2008, 10:07.
      One day at the time I guess..

      Comment


      • #33
        Parts update..................

        The exhaust and bumpers will be collected 2mo rather then 2day sorry everyone...
        I forgot that I am not in all day 2day due to the butty van shell being collected..
        All parcels are booked tho and off to u good people 2mo..

        Thanks again and sorry for the day delay...
        One day at the time I guess..

        Comment


        • #34
          hey, whats up guys? im looking for the front bull bar, side steps (if the brackets can take a bit of weight) and centre console with elbow rest box. if you can work out a price for me plus delivery to dublin, ireland. id really appreciate it. or i could possibly collect but id much prefer to have it posted. cheers mate. hear from you soon.

          Comment


          • #35
            Originally posted by tarmac View Post
            hey, whats up guys? im looking for the front bull bar, side steps (if the brackets can take a bit of weight) and centre console with elbow rest box. if you can work out a price for me plus delivery to dublin, ireland. id really appreciate it. or i could possibly collect but id much prefer to have it posted. cheers mate. hear from you soon.
            Well I can do the bullbar but for the otherparts ur better off trying Stormforce or supersurf...
            I have a choice of 2 bull bars for u...
            either this one:

            http://www.providing-business-soluti.../pics/dec1.JPG

            or this one:

            http://www.providing-business-soluti.../pics/red2.JPG

            make me an offer.. I can send them to Dublin via the courier no probs...
            What part of Dublin are u in?

            My family (dad) is from Terenure.
            One day at the time I guess..

            Comment


            • #36
              Originally posted by stormforce View Post
              i got a 3litre power steering pump here aswell.which is £65 plus delivery.
              The engine mounts are the both sections that bolt to the engine and the chasis with the rubber with them.All you will need to do is get some bolts for them unless i can find some to fit in the meantime
              Richard, I think he might be talking about a 3L (2.8 litre non-turbo) rather than a 3 litre (1KZTE) engine.

              Comment


              • #37
                id prefer the one on the grey surf, the bigger one. will it fit straight onto a 2.4 ssrx. the bracket on the bottom looks a bit wider than my a-bar brackets. and as for making you an offer...i have no idea. im new to surfing. how bout 60 pounds. the postage could be big though so if im way off then ill try again. and i live near terrenure in stillorgan. hardly any surfs over here.

                cheers

                Comment


                • #38
                  Originally posted by tarmac View Post
                  id prefer the one on the grey surf, the bigger one. will it fit straight onto a 2.4 ssrx. the bracket on the bottom looks a bit wider than my a-bar brackets. and as for making you an offer...i have no idea. im new to surfing. how bout 60 pounds. the postage could be big though so if im way off then ill try again. and i live near terrenure in stillorgan. hardly any surfs over here.

                  cheers
                  oh nice yeah I know stillorgan....
                  Anyway yeah the bar will fit onto ur ssrx as it comes with brackets to mount onto the bumper brackets...
                  I will lookinto what the postage will cost and then make a counter offer, as 60 is a bit less then what I was thinking off..
                  But not to worrie I will get a price and let u know how and what...
                  One day at the time I guess..

                  Comment


                  • #39
                    well then all the bumpers, and the exhaust have been collected this morning and shud be with everyone 2mo or thursday at the latest..

                    The bumpers will need a good clean tho...

                    I wanted to do it but then the parcel man was allready here so I will have to leave it up to u....



                    Anyway thanks everyone and enjoy the new (well new to u) parts...
                    One day at the time I guess..

                    Comment


                    • #40
                      The bumpers will need a good clean tho...

                      I wanted to do it but then the parcel man was allready here so I will have to leave it up to u....
                      No worries, have just cleaned half a field off from round the supports on my current ones so a bit more cleaning wont hurt! Cheers mate, looking forward to not having big holes in my surf now

                      Comment


                      • #41
                        Originally posted by J_D View Post
                        No worries, have just cleaned half a field off from round the supports on my current ones so a bit more cleaning wont hurt! Cheers mate, looking forward to not having big holes in my surf now
                        ok all good then..
                        I started cleaning cus I saw some spots and I thought they where rust but they came off lol.....
                        But then the deliveryman was here and I had to hurry with the packing lol...
                        I left the brackets for the middle back bit on so it's easier to put on for u... and also left the plastic on and the indicators in the front..

                        anyway I see the cleaning will be in good hands lol
                        Send me a pic when u get the bumpers on.....
                        One day at the time I guess..

                        Comment


                        • #42
                          Cheers Toby!!!

                          Hopefully should get it fitted on Friday or Saturday!

                          Comment


                          • #43


                            Arrived this morning! cheers mate!

                            Comment


                            • #44
                              Cheers mate, front and back arrived this morning! Left 1/4 panel should come tomorrow apparently (not sure why they split it up?) Will hopefully get them cleaned up and on over the weekend. Ta for the extras as well mate, have got a crack in one of my indicators so might change that over at the same time (will probably leave my own number plate on though )!

                              Comment


                              • #45
                                Originally posted by jelsplace View Post
                                Cheers Toby!!!

                                Hopefully should get it fitted on Friday or Saturday!
                                Good Good mate hope ur truck is MOTED soon...... Good Luck....

                                Originally posted by RodLeach View Post


                                Arrived this morning! cheers mate!
                                Glad it got there quick mate..... Hope u like it....
                                Let that corner shine...



                                only for a minute or two and then please get it muddy.......

                                Originally posted by J_D View Post
                                Cheers mate, front and back arrived this morning! Left 1/4 panel should come tomorrow apparently (not sure why they split it up?) Will hopefully get them cleaned up and on over the weekend. Ta for the extras as well mate, have got a crack in one of my indicators so might change that over at the same time (will probably leave my own number plate on though )!
                                Glad most of it is there,
                                I wonder why on earth they got them split up tho..
                                HAHAHAHA I wondered where my numberplate went.......
                                Can't believe I left it on lol It's the deliveryman's fault he was way to early..
                                and made me rush...................
                                One day at the time I guess..

                                Comment

                                Working...
                                X