Originally posted by BushBuster
View Post
Announcement
Collapse
No announcement yet.
Breaking my 2.4
Collapse
X
-
Originally posted by rainmaker02 View PostOnce again (*LOL*) thats fine. let me know when you are ready for cash.
Nige (CAREFULLY reading all posts)
Just gotta check, are you after the one with the pump mounted on the front, and do you want the actual pump with it?Paul </Slugsie>
Immortal.so far!
Comment
-
Originally posted by daithediver View PostIS the spare wheel lowering mech central or offset on the near side.If its central mounted how much for it ??
If you want it, I'll do it for £40 delivered.Paul </Slugsie>
Immortal.so far!
Comment
-
Thanks Paul,thats the same as I have already,but my rear bumper has a fitting welded behind the hole which prevents the handle going through at 45",it can only go along the centre line of the truck and engages in the short tube just above the cable box thingy.No way will it go to the winder with the slots in,any suggestions.I swear to drunk I`m not God.
Comment
-
Originally posted by daithediver View PostThanks Paul,thats the same as I have already,but my rear bumper has a fitting welded behind the hole which prevents the handle going through at 45",it can only go along the centre line of the truck and engages in the short tube just above the cable box thingy.No way will it go to the winder with the slots in,any suggestions.
Or you could get the angle grinder out, and cut the welded bit out. Any idea what it's for?
*EDIT*
Is it like this bit?Last edited by Slugsie; 7 June 2008, 19:05.Paul </Slugsie>
Immortal.so far!
Comment
-
Originally posted by qball View PostHave you got the tailgate still?
If so, i'm after the cables that go from the cogs to the locks on both sides, and the passenger side lock/catch unit.
If you've still go these, how much would you want for them?
PM if you want.
Cheers
Q
If you can hold off for a week or two I'll get them off, see what condition they're in, and work out a price.Paul </Slugsie>
Immortal.so far!
Comment
-
Originally posted by Slugsie View PostJust removed it, PITA!
Just gotta check, are you after the one with the pump mounted on the front, and do you want the actual pump with it?
Only definite that I can give you is that mine is 8 1/2" from the outer pulley to the back.
But I'm still interested.... and in need!Keep your friends close and a hammer closer
Comment
-
Originally posted by rainmaker02 View PostHere's what the back end looks like
I want to make certain that it's the right one, I don't want you to waste your money.
The big black stain is just some oil that leaked when I was removing it BTW.Paul </Slugsie>
Immortal.so far!
Comment
-
Originally posted by rainmaker02 View PostHi Paul, sorry for the delay. Just had a look at mine and not sure if its got the pump on.
Only definite that I can give you is that mine is 8 1/2" from the outer pulley to the back.
But I'm still interested.... and in need!Paul </Slugsie>
Immortal.so far!
Comment
Comment