Tweet
Hi - I'm about to put manual hubs onto the truck, and want to replace the hub that it attaches to, the bolts and bronze bushes at the same time - has anyone got the lot from a breaker, and if so, how much?
TIA
TIA
-
Too old to care, young enough to remember -
Which truck ? as you have 3
may be able to help
' You've arrived on a rather special night. It's one of the master's affairs.' -
It's for the 3.0 2nd Gen....
Oh - and if you could note how they come off, I'll read it backwards when I put them on....
Too old to care, young enough to rememberComment
-
Bio bump.......
Too old to care, young enough to rememberComment
-
You may end up having to get new upper and lower ball joints Andy as they may be a sod to get off and end up damaged.
The 2.4 hubs should go straight on the 3.0l no probs.Just a pity i never knew 3 weeks ago as i ended up scrapping one hub as i needed to get the truck out quick to get the boys car inhttps://www.facebook.com/groups/henpals/Comment
-
I have a full set of upper and lower ball joints - so can change them if need be....Too old to care, young enough to rememberComment
-
also careful with the outer track rod ends aswell Andyhttps://www.facebook.com/groups/henpals/Comment
-
Not having alot of luck ......have the drivers side off but the wheel bearing is shagged.........it's only done 2k
' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
I have a front bearing set.....does that help?Originally posted by BioHazzard View PostNot having alot of luck ......have the drivers side off but the wheel bearing is shagged.........it's only done 2kToo old to care, young enough to rememberComment
-
Sorted .....see you sunday' You've arrived on a rather special night. It's one of the master's affairs.'Comment
-
Thanks Bio buttocks!
Got them home, now to find time to put them on!
Good to see you again, hope you had a nice day out in Burford!Too old to care, young enough to rememberComment
Comment