Tube Bumper Pattern

[Bald Eagle]

Hi ya'll, has anyone on here got any idea where I could get a detailed pattern for a tube bumper with winch mount and dimensions to suit my 3rd gen? I'm also looking to replace my rear bumper and replace it with a tube type. I have two welders mig and arc and can hire a pipe bender locally. Also doing a 2" body lift and have ordered some 50mm Acetal to make the lift spacers from, does anyone know what length HTS bolts I'll need to replace the originals?

[stormforce]

whatever size bodylift you do you will need the bolts that much longer
Also a 2nd gen ariel will fit the 3rd gen.Keep the 3rd gen ariel bits that fit on the outside of the wing tho as you will need them for the 2nd gen ariel

[Bald Eagle]

Thanks Stormforce. The lift I'm doing is 2" and to save myself the trouble of removing every bolt and measuring it and adding the extra two inches I just wondered if someone could tell me the original lengths of all the body bolts on a 3rd gen? Are the shanks 12mm thick and how much shank is there compared to how much thread? Example: 12mm thick shank x 6" total length with 1" of thread.

[stormforce]

i can't help with the measurements as i've never done a 3rd gen bodylift yet

[Hawaii]

Bald Eagle

mornin'

LA supertrux do a body lift kit for the 3rd gen. there is a link to their site on the home page - you could try giving them a ring for the bolt dimensions

hope this helps

hawaii

[Bald Eagle]

Thanks Hawaii, will do.