yobit eobot.com

Announcement

Collapse
No announcement yet.

2nd Gen Window Switch Mod.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2nd Gen Window Switch Mod.

    A nice simple upgrade for your passenger window switches. Use illuminated ones from a 1st gen Lexus GS300. Dead simple mod, all it needs is a wee bit of cable joining.

    Go to your local breakers and get the passenger window switches (the driver cluster is different) and as much of the switch looms as you can (1" is enough, but the more the better).

    Take the surf switches out of the cowls and fit the Lexus ones, they snap right in. Then, cut the Surf plug off (leave about an inch of cable so that you can re-fit if something goes wrong) and fit the Lexus plug.

    The wire colours are different, so connect them as follows:

    Positive - (Surf) Blue/Red to (Lexus) Blue

    Down - (Surf) Blue/Yellow to (Lexus) Red

    Up - (Surf) Blue/Green to (Lexus) Green

    Negative - (Surf) Red/Yellow to (Lexus) Green/White

    Negative - (Surf) Red/Blue to (Lexus) Red/Blue

    Job done. I'll change the green LEDs for blue ones at some point.

    The Driver's door cluster on some Surf's has all 4 window switches illuminated, but most don't seem to be. Dead easy to swap over if you can find a Surf one with 4 lights. If not, get a 1st gen Avensis one, it's a straight swap.

    Only thing I want to find now is an illuminated mirror adjuster switch. Any ideas?






    Not done the passenger switches yet, I ran out of blue LEDs!
    Last edited by Albannach; 17 June 2010, 23:00.
    Do you know that, with a 50 character limit, it's

  • #2
    Any pics?
    The sh$t gets deeper ...but still swimming

    Comment


    • #3
      Tis good, I'm going to do this, I've noticed all pre-EFI surfs have all 4 window switches illuminated, but EFI-on all seem ot only have the drivers window switch illuminated.

      Good find.
      4x4toys.co.uk - Keeping you on and off the road...

      Comment


      • #4
        Originally posted by wiggy View Post
        Any pics?
        I'll nip out later and take some when it's dusk.
        Do you know that, with a 50 character limit, it's

        Comment


        • #5
          Originally posted by TonyN View Post
          Tis good, I'm going to do this, I've noticed all pre-EFI surfs have all 4 window switches illuminated, but EFI-on all seem ot only have the drivers window switch illuminated.
          My 2.4 had them all illuminated too, but the 3.0L's don't seem to be. The 2.4 also had a 'shut the windows with the ignition off and the door open' feature. I meant to try and figure out how they did that, before I scrapped my 2.4, but never got round to it.
          Do you know that, with a 50 character limit, it's

          Comment


          • #6
            Originally posted by Albannach View Post
            I'll nip out later and take some when it's dusk.
            Ta very much ....good idea about the switches, just went down the priority list tho as the rad went at lunch
            The sh$t gets deeper ...but still swimming

            Comment


            • #7
              Pics added.
              Do you know that, with a 50 character limit, it's

              Comment


              • #8
                Nice one Ta very much!
                The sh$t gets deeper ...but still swimming

                Comment


                • #9
                  There are a load of clusters on eBay at the moment if people are thinking of doing the same thing. I will when finances allow it

                  Thanks Albannach, good stuff!


                  Ray.
                  I've got a plan and it's as hot as my pants!

                  Comment

                  Working...
                  X