solid axle swap.

[RodLeach]

And what ratio?

Depends mate. 5.29 would be good for 35's if not a little bit low.

I'd probably get the 5.29's because judging by the lift your going to want to run them at the very least!

[yoshie]

http://www.marlincrawler.com/differe...inion/rp-hilux



35's would be better with that kind of lift. If its still too much you can always ask mark to mount the axles on top of the springs!




Good work though mark! nice!

link me the the diff kits please as get confused as what i am looking for...........might be 35's now

$200 plus delivery, surely there must be summit out there you can steal the R&Ps from. The wee sj zukis steal the R&Ps from two front vitara diffs to drop from 4.1-1 to 5.2-1. There must be a similar option from the scrappy for the Surf. The vitara into sj diff puts low 1st gear somewhere between low 3rd and 4th giving 3 more lower gears. Re gearing is

[BioHazard]

i was hoped some one might know but if not it looks like new

[RodLeach]

$200 plus delivery, surely there must be summit out there you can steal the R&Ps from. The wee sj zukis steal the R&Ps from two front vitara diffs to drop from 4.1-1 to 5.2-1. There must be a similar option from the scrappy for the Surf. The vitara into sj diff puts low 1st gear somewhere between low 3rd and 4th giving 3 more lower gears. Re gearing is

Nothing that im aware of..

Dont forget the taxes on top. Gears are fecking expensive!!!

[BioHazard]

Pictures from saturday, Neil from outrageous showed me what he had done..........







Front shackle mounts




Shock mount needs repositioning


The future position of the lift shackle

[captain_chaos]

looking good progress. How are the driveshafts lining up? Will they need extending?

[BioHazard]

looking good progress. How are the driveshafts lining up? Will they need extending?

Drive shafts????

It don't have any now


Half shafts and prop shafts , YES

[That Ruddy Squirrel]

After removing the old steering etc it must have taken them 2 days to clean the workshop up

[surfenstein]

you aint wrong there trev,cow phoo in mouth comes to mind.
anyways here some more progress pics.ian i need to talk to you give me a ring mate.

shock hoop and rear spring mounts fabbed and fitted.

[yoshie]

Looking good nice work. Some big bump stops needed to save those springs going past flat. Nice lift all the same.

[Apache]

Nah, just pretend you always meant it to be 'slammed'

[BioHazard]

Stein phoned me today ........ he recons it is 3 feet from the ground to the bottom of the sill .........



any one got a link to a rope ladder supplier

[That Ruddy Squirrel]

Stein phoned me today ........ he recons it is 3 feet from the ground to the bottom of the sill .........



any one got a link to a rope ladder supplier

Shortar5e !!!!!

See if Will can get you some rigging, you can use that for a ladder

[captain_chaos]

parachute for getting back out?

[thecaretaker]

What you need is a firemans pole to get out of it and a rope ladderto get into it lol