Tracking

[david moore]

Hi Guys,
Is there anyone out there that could give me the tow in tow out settings after fitting four inch rear lift and front inch and half ball joint spacers

Many Thanks
Keep on surfing!

[Jonny77]

Just adjusting the toe wont help after a ball joint suspension lift. Lifting introduces positive camber which needs to be corrected, a bit like when you slam a car it generates negative camber.
You need a full alignment which will check the camber, castor and toe.
For reference the settings should be:
Camber: 0*10 - 1*10
Caster: 1*10' - 2*10'
Toe: 0*03' - 0*15'

[Apache]

I had mine done a few days ago. My camber was near OK. However it was VERY negative before I fitted the spacers.

The tracking was miles out though (nearly 2 degrees), probably due to the odd bump over the years

I would suggest that if the top of your tyres look further out than the bottom, you need to have a full alignment.

PS, only lifting on BJ spacers changes the camber by lengthening the top wishbone. However, lifting or lowering a car with equal length top and bottom wishbones wont change camber.

[david moore]

Tracking

Hi guys wher can i get a full alinement check done in wakefield many thanks

[BUSHWHACKER]

It's only the front wheels that need checking, the rears are fixed.