yobit eobot.com

Announcement

Collapse
No announcement yet.

wallowing like annoverweight porker and major oversteer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wallowing like annoverweight porker and major oversteer

    About a month ago on a trip down to Glasgow in torrential rain as usual my usually steady as a rock baby decided to nearly put me into the middle of a roundabout due to oversteer which I thought may well have been due to greasy wet road. However after I had collected myself together and carried on. I noticed that I had very little resistance wen cornering and she was wallowing about like and old sofa! Had her checked out and a track rod end was almost done. So I replaced both. Tracking all done but still.much the same? I'm thinking anti roll bar bushes? Any ideas anyone before I start replacing all front suspension parts and steering??
    Geeman

  • #2
    Yes, I would check both ARBs, maybe a broken link?

    Cheers

    Comment


    • #3
      That would explain it wallowing about... What about the oversteer?
      Geeman

      Comment


      • #4
        Originally posted by Graham T Smith View Post
        That would explain it wallowing about... What about the oversteer?
        What tyres have u got on it-front and rear?

        Comment


        • #5
          Cooper at/3's 17"s
          Geeman

          Comment


          • #6
            Originally posted by Graham T Smith View Post
            Cooper at/3's 17"s
            Nice tyres. Well it shouldn't be them then. More checks on steering system needed.

            Comment


            • #7
              Do you have the hard soft setting on the dampers?
              www.overfab.uk

              Comment


              • #8
                Yeah.the hard setting is not much different any more. Used to be a noticeable difference but not anymore
                Geeman

                Comment


                • #9
                  Originally posted by Graham T Smith View Post
                  Yeah.the hard setting is not much different any more. Used to be a noticeable difference but not anymore
                  possible damper failure.
                  www.overfab.uk

                  Comment

                  Working...
                  X