No Drive

[tony exall]

Help!!
just had the turbo changed on my 91 2.4 ssr auto and now it has lost all drive?
When recovered the propshaft was removed to allow a suspended tow, apart from this nothing relating to the auto trans has been touched.
Are any of the vac tubes connected to the auto box?
the only other symptom is a rattle from the torque converter area , or could this be just debris from the old blown turbo?
Can anyone help?

This has the garage and me stumped?

[andy]

Have you checked that the High/Low range lever has not been knocked into neutral.

[tony exall]

Yes all knobs, buttons & levers in the correct place.
Ta any way

[rich]

Did they put the prop back on?

Only messing. Strange that you have no drive, have you checked the oil in the auto box. If there is none in the torque converter it wont go anywhere.

Have you run it in drive for a while as this will get the oil pumped to the TC if it has drained out (Not that I know why it would!)

Also worth checking but I assume that they have is that the high/low ratio selector is attached correctly and isn't stuck in neutral.

Rich.