Bumper Fitting Instructions KZN 130 1994 ?

[Andrew99]

Anyone know where I can find instructions for fitting the front chrome bumper and rear quarter bumpers on a KZN 130 3 litre td 1994 ?

Or has anyone got a workshop manual they could photocopy the relevant pages and I could pay for these copies ? Thanks

[Chevydancer]

Try downloading the relevant chapter from here.
http://www.hiluxsurf.co.uk/showthread.php?t=68689

You may have to use the leechtube, though see nearer end of thread.

[Andrew99]

3.0L bumpers

Thanks but cannot find a link for the section that would have bumpers.

Dees anyone have workshop manual for a 1994 KZN 130 3.0 TD ?

Happy to pay for some photocopies of the front and rear bumper fitting section

[wishbone]

Just get under there with a torch and find the bolts - front has 2x 14mm per side on the brackets near the bash plate and 2 x 12mm nuts inside wheel arches near the top of the bumper trims (access through hole in plastic liner) Don't forget to unplug your indicators.

Rear quarters have 2 x 12mm nuts per side with 3 x 12mm bolts (1 hidden under the black plastic trim on top of bumper) and 2x 10mm bolts near wheel arch. I think there's 4 x 10mm bolts holding the mudguard on too.

edit - try and wd40 all the bolts for a few days before you remove them - they are prone to shearing.

[Andrew99]

bumper fitting

Many thanks for your help