yobit eobot.com

Announcement

Collapse
No announcement yet.

brake disc removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brake disc removal

    how do i get the front discs off.
    i tried the other day and they seamed to be stuck.
    is there a special tool or something used to pull them off.
    thanks

  • #2
    Originally posted by sketty View Post
    how do i get the front discs off.
    i tried the other day and they seamed to be stuck.
    is there a special tool or something used to pull them off.
    thanks
    If you have a turd gen, wheel off, caliper off, disc off.

    2nd gens are a bit more involved...
    Do you know that, with a 50 character limit, it's

    Comment


    • #3
      i tried that but the disc seems stuck on i tried hitting it with a wooden mallet with no luck.... i now they should just slide off but it isnt so is there a pulling tool i could buy

      Comment


      • #4
        I've never changed a turd gen disc, but it should just fall off. Check to see if there are any screws holding it on, or, if there are threaded holes in the disc. If there are threaded holes, you could screw a couple of bolts in and push it off (bolts will probably be 8mm).

        If you hang around, a grown up will be along to help more.

        The above assumes you have a turd gen, which you haven't confirmed.
        Do you know that, with a 50 character limit, it's

        Comment


        • #5
          http://www.hiluxsurf.co.uk/showthread.php?t=67477

          Nev

          Comment


          • #6
            Originally posted by Albannach View Post

            If you hang around, a grown up will be along to help more.

            The above assumes you have a turd gen, which you haven't confirmed.
            I wouldn't bet on it!

            Yeah, need to know what truck you have, no point typing a out an essay on doing 2nd Gen discs, if you have a 3rd Gen where they are held on by the wheels.
            4x4toys.co.uk - Keeping you on and off the road...

            Comment


            • #7
              He has previously said he has a second gen.

              Nev

              Comment


              • #8
                LOL, thats unlucky for him!

                Its probably just rusted on then, I have a big block of wood to rest the hub on, then beat the disc off over it.
                4x4toys.co.uk - Keeping you on and off the road...

                Comment


                • #9
                  Originally posted by NiftyNev View Post
                  He has previously said he has a second gen.

                  Nev
                  I didn't recognise the name. But I did tell him how to get the disc off
                  Do you know that, with a 50 character limit, it's

                  Comment


                  • #10
                    sorry not been on for a few days its an N reg 3.0L 2nd gen

                    Comment


                    • #11
                      See what you did when you changed your wheel stud? Just do that again, without removing the stud.
                      Do you know that, with a 50 character limit, it's

                      Comment

                      Working...
                      X