Wrong anti roll link?

[biosurf]

Milners just sent me a new anti roll link and it has a metal gubbiny bit on the end that attaches to the ARB (see pic).


Just want to check that this isn't right for a second Gen Surf - the links fitted on at the mo do not have this but it seems the previous ones are non matching so just wanted to check its not how they are supposed to be before I send it back?

Ta

[biosurf]

Shameless bump as the tech section always disappears

[TonyN]

looks ok to me? what dosn't fit?

Front....

http://www.roughtrax4x4.com/?doc=16&cid=161&vid=769

Back...

http://www.roughtrax4x4.com/?doc=16&cid=162&vid=962

If you mean that little tab, can't you knock it off if it dosn't fit round your ARB end.

[biosurf]

looks ok to me? what dosn't fit?


If you mean that little tab, can't you knock it off if it dosn't fit round your ARB end.

Yep, guess so, just it caught on the ARB a bit. I'll give it a whack and see if it detaches. cheers Mr N.

[TonyN]

You can't go wrong with a big hammer.

I'd just bend the tab up if you can't get it off, rather than all the hassle of sending it back.