half shaft bearing..

[an1mal_69]

anyone done theirs..?

got the kit from Milners, just wondering if the bearing is pressed in..i.e a nightmare to remove.? Found loads of info on getting the shaft out, but it all seems to stop there

[lord lucan]

anyone done theirs..?

got the kit from Milners, just wondering if the bearing is pressed in..i.e a nightmare to remove.? Found loads of info on getting the shaft out, but it all seems to stop there

getting the old one off is pain as there is an abs ring stuck in between putting together is easy with a scaffold tube

[NiftyNev]

No ABS on a second generation.

Nev

[lord lucan]

sorry thought he had 3rd gen

[an1mal_69]

confused everyone & myself i think..

its the front halfshaft/driveshsft..looks like i ordered the wrong kit from milners its the o/s/f shaft seal and bearing i was after doing.

got it all too bit before i realised it was the wrong kit, CV boots were done anyways, i've left the shaft off for now until i get the right parts..looks like the front diff needs stripping to change the bearing, is that right..??