grinding noise on left turns

[wpg_kzn130]

i just recently changed my Pittman arm, idler arm busing and front bearings. but now i have a nasty girding noise when i make hard left turns. it's never done this until now. i don't know if it's because of the new parts i've had installed or because it was sitting out side for 3 months rusting, any ideas?

[charvell]

put a big blob of greese on the steering stops

[MattF]

You'll find two on either side, one at the front end and one at the rear end of the wheel.

[wpg_kzn130]

it worked! now i just need to grease put grease in all the nipples. i'm new at this and don't know how much grease i should put in them. i bought synthetic grease to do this but i wanted to get some info on it first before i do it. and do i use the same grease for all the nipples? i don't know the names of the spots i should grease as they are in japenses, could you shine some light on this subject for me please. Thanks!

[charvell]

just pump until it spurts out, not too sure what type of greese you should use i think lithium greese springs to mind but i may be wrong