yobit eobot.com

Announcement

Collapse
No announcement yet.

Brake caliper piston seals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake caliper piston seals

    Can you get the piston seals seperatly or do you have to buy the caliper ?

    Does anybody know.

  • #2
    They can be bought separitely.
    Do you know that, with a 50 character limit, it's

    Comment


    • #3
      Originally posted by Albannach View Post
      They can be bought separitely.
      Any idea where ? Ive been tryin to get them in and around Edinburgh without success phoned roughtracks but they dont do them either a local breaker will only sell me a caliper at £30 but to be honest it isnt in any better nick than the one ave got its only the seals that are knackered.

      Comment


      • #4
        I think only Toyota, from memory they're about £25 per side (it's not advisible to do one side only).
        Do you know that, with a 50 character limit, it's

        Comment


        • #5
          Ave just foned western toyota in edinburgh and they do them and they quoted me a price of wait for it,

          £221 plus vat and that is for four seals ie. one side

          a told the Joker to Stuff it ! and that I could buy a new caliper complete with seals for £105 plus vat.

          The thing is ave cleaned up the seals av got and only one is knackered I could re use the other three, so if any one oot there has one seal al be forever in there debt.

          Comment


          • #6
            No use Brakes Iternational, they supply enougth kit to rebuild the entire caliper, I recently did both seals, and pistons.

            I've got their details around here somewhere.
            Gone from 4x4 to 1x2

            Comment


            • #7
              Here you go, just searched through my posts (it's quicker that my filing system).


              Brakes International, in Rochdale, Phome 01706 666 999.

              The repair kit listed on their system for my truck didn't fit, so it's an idea to measure the piston diameter before you phone. Mine were 45mm, and the part number (that fitted) was BCK4522, I spoke to Jason throughout and he proved customer service still exists.
              Gone from 4x4 to 1x2

              Comment

              Working...
              X