Anti Roll Bars required.

[VW TARO]

hello All


i have hilux or be it a VW taro (same except for the badge).

the truck has intergrated camper unit on the back and it makes the truck sway all over the place thus i require the front and rear anti roll bars.

any of you who have some laying around now is your chance to flog them off.

i need the front ARB with all the fittings/bushings/bots etc and the rear ARB with the same fixings

i live just out side berlin and finding a hilux out here is like finding rocking horse poop.

also any ideas on which shocks are the best for the increased load on the rear.

kind regards

kevin summers.

[stormforce]

you may be better off getting the 20% uprated springs from www.milneroffroad.com and perhaps some es9000's which will give a much firmer ride or go for the es3000's for a slightly softer ride with the springs

[VW TARO]

Arb

just on the web site now trying to find them pesky shocks.

good luck for this summer with the emmits, used to have to drive to padstein evey day from perrenporth, the stress!!!
any thanks the tip dont know any with some ARBs they dont want do you??

[stormforce]

just on the web site now trying to find them pesky shocks.

good luck for this summer with the emmits, used to have to dive to padstein evey day from perrenporth, the stress!!!
any thanks the tip dont know any with some ARBs they dont want do you??

I have 2 arbs on the 3.0l breaker i got here but the front brackets are missing but you can buy the bushes and brackets from milners also.
The shocks you will find on www.roughtrax4x4.com

[BUSHWHACKER]

I have 2 arbs on the 3.0l breaker i got here but the front brackets are missing but you can buy the bushes and brackets from milners also.
The shocks you will find on www.roughtrax4x4.com

S'ok Rich, I know where the brackets are.

[stormforce]

S'ok Rich, I know where the brackets are.

how did you get them then vince

[BUSHWHACKER]

how did you get them then vince

They just turned up in a jiffy bag one day, weird..

[VW TARO]

arbs

great i will have the lot

Rite then if they fit on a 3lt d they should fit on 2.4d perviding that the wheel track is the same, any chance you could check? if you think they fit, bag em up and email me a price - my work email is kevin.summers@anecom.de
system shafters do not allow us to access hotmail!!!

many thanks

kevin

[stormforce]

great i will have the lot

Rite then if they fit on a 3lt d they should fit on 2.4d perviding that the wheel track is the same, any chance you could check? if you think they fit, bag em up and email me a price - my work email is kevin.summers@anecom.de
system shafters do not allow us to access hotmail!!!

many thanks

kevin

The 2.4 and 3.0l are the same so will bolt straight on.email sent

[TonyN]

Rich, you might want to unbolt the brackets from the chassis that hold the links from the ARB's. I doubt it'll have them, also remember its a pickup with leaf springs on the rear, so might not have mounts on the axle for the ARB.

It's all overcomable, but might not be a straight bolt on.

[stormforce]

Thanks Tony i'll email Kevin later when i get home to make sure he still wants them

[VW TARO]

arbs

yep might be needing them axel plates u bolts to hold the ARB on. better put me down for them aswell. anything else while we are at it, this list could get bigger

[Blizzard]

The Taro has rear leafs and the Surfs have coils as you know. I'm not sure if they'll fit.

David

[VW TARO]

arbS

yep just finished fabricating ARB brakets to fit it, also had to invert the rear arb and sit it on top of the axle.

the front arb is ok but was designed for the surf only with space for 4x4 transfer box, had to mount it 100mm off from the chassis (existing mounting points) and cut 20mm of the end of the bar which means i now need to drill 2 new holes to fit the links, appart from that its going ok, should have it done by friday night. off now to DIY store, need more steel and 10mm rod so i can fabricate some axle U bolts.

pictures will show up here soon maybe.

thanks for information though.

regards

kevin