If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Will ask when I get mine done after the Wales trip. Since fitting the spacers, its eating the front tyres. Need to do the track rod ends first too, as a precaution.
Tyres r us is the place i use and it's £25 for a full laser setup, castor,camber kingpin etc, takes abot 45mins - 1hr to do and well worth every bean. You get a printout of before and after showing tolerance and differences.
They used lasers, removed the steering wheel and put it back on straight, had two test drives and two final tweeks before they were happy that everything was OK before letting me drive out, plus I got a print out of the before and after results.
They used lasers, removed the steering wheel and put it back on straight, had two test drives and two final tweeks before they were happy that everything was OK before letting me drive out, plus I got a print out of the before and after results.
Independant garage BTW.
?
They should straighten your steering wheel first then clamp it to the floor so it can't move when adjusting.
Yeah Vince, if its so cheap and so good, why keep it to yerself? Come on, spill the beans! I can spend South Wales type fuel AND still save money at those prices!
Comment